12 open source boards using the BTS7960B
Real designs built with the BTS7960B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
MDE22
ZeniteSolar
144 × 59.5 mm69 parts2LNo license2ESP32
HoloCade Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LMIT1STM32
Shield stm2025
Rami-Troudi
83.6 × 107.3 mm42 parts2LNo license1ESP32
SBC
ahmedsiddyq
108.2 × 124.9 mm366 parts2LNo license0ESP32
Customized-AI-Electric-Wheelchair
prisca7c
216.3 × 115.1 mm119 parts2LNo license0STM32
-motor driver
AYUSH-pro-grammer
162.5 × 57.4 mm113 parts4LNo license0ESP32
Hospital Bed Controller
Amaza-Ronald
109.5 × 105.7 mm106 parts4LNo license0ESP32
LBEAST Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LMIT0ESP32
HoloCade Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LNo license0Motor Driver
duongngochoan
40.9 × 51.1 mm22 parts2LNo license7Motor Driver
duongngochoan
40.9 × 51.1 mm22 parts2LNo license7PIC
Motordriver
ahmedsiddyq
130 × 111 mm139 parts2LNo license0
How designs wire the BTS7960B
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the BTS7960B connects to, and the resistors, capacitors and other passives placed on it.
- The IS pin has a resistor to GND on 11 of 11 designs, most often 1 kΩ (then 2.2 kΩ).
- The INH pin has a series resistor on 7 of 11 designs, most often 220 Ω (then 10 kΩ).
- The SR pin has a resistor to GND on 7 of 11 designs, most often 10 kΩ (then 5.1 kΩ).
- The IN pin has a series resistor on 6 of 11 designs, most often 220 Ω (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 91% | — |
| INpin 2 | Connected to: 74HC244 27% |
|
| INHpin 3 | Connected to: Signal 100% |
|
| SRpin 5 | Connected to: Signal 64% · not connected 27% |
|
| ISpin 6 | Connected to: The microcontroller 45% |
|
| VSpin 7 | Connected to: 12V 64% · a signal 36% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Motor Driver by duongngochoan, Motor Driver by duongngochoan, MDE22 by ZeniteSolar and Shield stm2025 by Rami-Troudi.
The BTS7960B in open source designs
The gallery holds 12 open source boards using the BTS7960B from 11 GitHub repositories; a typical one measures about 118 × 84.5 mm and carries around 78 components.
83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Motor Driver by duongngochoan.
Parts used alongside the BTS7960B
Microcontrollers on boards using the BTS7960B
What boards using the BTS7960B are built for
BTS7960B: common questions
Where can I find a BTS7960B reference design?
Each of the 12 boards on this page is a real design using the BTS7960B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BTS7960B IS pin?
The IS pin has a resistor to GND on 11 of 11 designs, most often 1 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 11 open source designs using the BTS7960B.
What resistor goes on the BTS7960B INH pin?
The INH pin has a series resistor on 7 of 11 designs, most often 220 Ω (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the BTS7960B.
What resistor goes on the BTS7960B SR pin?
The SR pin has a resistor to GND on 7 of 11 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 11 open source designs using the BTS7960B.
What parts are used alongside the BTS7960B?
The 74HC244, ADM3057ExRW, AMS1117-3.3, ESP32-S3-2x22 and L7805 appear in the most repositories here.
Which microcontrollers do boards using the BTS7960B use?
Most are built on ESP32 (6), STM32 (2), AVR/Arduino (1) and PIC (1).
How big is a typical board using the BTS7960B?
The median is 118 × 84.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the BTS7960B?
By GitHub stars, Motor Driver by duongngochoan, with 7 stars.
Can I simulate one of these boards using the BTS7960B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.