Fra clock

albertoboffi-PERSONAL·fra-clock·hardware/fra_clock.kicad_pcb

Fra clock PCB layout, top view — open source ESP32 board by albertoboffi-PERSONAL

About the Fra clock PCB

Fra clock is an open source ESP32 PCB design by albertoboffi-PERSONAL, published on GitHub. It is a 2-layer board measuring 210 × 297 mm, with 408 components from 25 distinct parts.

Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the AP2112K-3.3TRG1, USBLC6-2SC6, CH340C, 74AHCT125 and MAX98357AETE+T. By type, the board carries 194 capacitors, 180 diodes, 20 resistors, 7 ICs, 3 transistors and 3 connectors.

It belongs with the audio designs in this gallery.

From the project

A one-off gift PCB designed in KiCad 10: an ESP32 clock with a ring of 180 WS2812B‑2020 LEDs, a photo printed in exposed copper on the front, two Makerverse 8 Ω / 5 W speakers driven by two MAX98357A I²S amplifiers, USB‑C power/programming (CH340C) and an NFC tag area.

A one-off gift PCB designed in KiCad 10: an ESP32 clock with a ring of 180 WS2812B‑2020 LEDs, a photo printed in exposed copper on the front, two Makerverse 8 Ω / 5 W speakers driven by two MAX98357A I²S amplifiers, USB‑C power/programming (CH340C) and an NFC tag area.

1. Upload production/fraclockgerberjlcpcb.zip (2 layers, 1.6 mm). 2. Surface finish: ENIG keeps the copper photo gold and flat (HASL turns it silver and uneven). Solder-mask colour sets the photo contrast. 3. For assembly upload production/assembly/fraclockBOMJLCPCB.csv and fraclockCPLJLCPCB.csv`, then check rotation / pin 1…

Fra clock, from the project README
From the project README

Main components on the Fra clock

Fra clock bill of materials (BOM)

408 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3TRG1
AP2112K-3.3
U1
1
USBLC6-2SC6
U2
1
ESP32-WROOM-32E-N4
ESP32-WROOM-32E
U3
1
CH340C
U5
1
74AHCT125
U6
2
MAX98357AETE+T
MAX98357A
U101, U102
2
MMBT3904
Q1, Q2
1
2N7002
Q3
1
TYPE-C-31-M-12
USB_C
J1
1
S2B-PH-SM4-TB
SPK_TOP
J101
1
S2B-PH-SM4-TB
SPK_BOT
J102
1
C20812
2A
F1
180
WS2812B-2020
D201, D202, D203, D204, D205, D206, D207, D208 +172
4
CC0603KRX7R9BB104
100nF
C1, C5, C8, C70
1
CL21A226MAQNNNE
22uF
C2
5
CL21A106KAYNNNE
10uF
C3, C4, C6, C71, C72
1
CL10A105KB8NNNC
1uF
C7
1
470UF
470uF
C69
182
CL05B104KO5NNNC
100nF
C101, C102, C201, C202, C203, C204, C205, C206 +174
2
0603WAF5101T5E
5.1k
R1, R2
Show 5 more
QtyPartRefs
8
0603WAF1002T5E
10k
R3, R4, R5, R6, R7, R16, R17, R18
4
0603WAF4700T5E
470
R8, R13, R14, R15
1
0603WAF1003T5E
100k
R9
3
0603WAF330JT5E
33
R10, R11, R12
2
0603WAF1004T5E
1M
R101, R102

Fra clock design files

The KiCad project lives in the albertoboffi-PERSONAL/fra-clock repository on GitHub; these links point at the commit this page was built from.

Fra clock: common questions

What microcontroller does the Fra clock use?

The Fra clock is built around the ESP32-WROOM-32E-N4, from the ESP32 family.

How big is the Fra clock PCB?

The Fra clock measures 210 × 297 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fra clock?

408 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fra clock design files?

From the albertoboffi-PERSONAL/fra-clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fra clock design in my own project?

The repository has no license, so all rights stay with albertoboffi-PERSONAL. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fra clock without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards