Desk guardian
AlexOpanasevych·beetroot_embedded_course·miniproject_module5/desk_guardian.kicad_pcb
About the Desk guardian PCB
Desk guardian is an open source ESP32 PCB design by AlexOpanasevych, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 78 × 106 mm, with 23 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 8 resistors, 5 capacitors, 2 ICs, 2 connectors, 2 LEDs and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
Module tasks for Beetroot Embedded course
KiCad 10 schematic and PCB for a small "pet" gadget: an ESP32-S3, powered from USB-C, that watches for motion with a PIR sensor and reacts with a buzzer "bark" and two LED "eyes". Built per the module 5 mini-project brief (MCU + power supply + ≥1 input sensor + ≥1 output, hardware filtering, PCB routing rules), reusing the module 5.1/5.2 power-supply subcircuit as its reference.
Main components on the Desk guardian
Desk guardian bill of materials (BOM)
23 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J1 |
| 1 | PIR_Sensor | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | SW_PUSH | SW_SPST_B3U-1000P | SW1 |
| 2 | LED_Red | LED_0603_1608Metric | LED1, LED2 |
| 1 | 1N4148 | D_SOD-123 | D1 |
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 3 | 100nF | C_0603_1608Metric | C3, C4, C5 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 10k | R_0603_1608Metric | R3, R4 |
| 1 | 100k | R_0603_1608Metric | R5 |
| 1 | 1k | R_0603_1608Metric | R6 |
| 2 | 220 | R_0603_1608Metric | R7, R8 |
Desk guardian design files
The KiCad project lives in the AlexOpanasevych/beetroot_embedded_course repository on GitHub; these links point at the commit this page was built from.
Desk guardian: common questions
What microcontroller does the Desk guardian use?
The Desk guardian is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Desk guardian PCB?
The Desk guardian measures 78 × 106 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Desk guardian?
23 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Desk guardian design files?
From the AlexOpanasevych/beetroot_embedded_course repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Desk guardian design in my own project?
Yes, under the terms of its GPL-3.0 license, which AlexOpanasevych chose for the repository.
Can I test firmware for the Desk guardian without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in beetroot_embedded_course
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k