HPM6P41 BB
Alipay1·HPM6P41_BB·HardwareProject/HPM6P41_BB.kicad_pcb
About the HPM6P41 BB PCB
HPM6P41 BB is an open source PCB design by Alipay1, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 80.3 mm, with 276 components from 88 distinct parts.
Other key parts include the UCC27211ADRMR, UCC27517, SYR838PKC, SY8089 and LP5907MFX-3.3. By type, the board carries 105 capacitors, 82 resistors, 25 ICs, 20 diodes, 13 connectors and 10 inductors.
From the project
以HPM6P41为主控的电源开发板
目前项目处于暂停状态,作者正在考研,非常抱歉! 您可以拉取项目的Rev3最终版本提交,这个版本可以通过测试用例,能够基本满足开发板的运行要求(ADC部分有噪声) Rev4将在项目恢复更新后继续完善
Main components on the HPM6P41 BB
HPM6P41 BB bill of materials (BOM)
276 components, 88 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | UCC27211ADRMR | DRM8_3P38X2P45_TEX | U1, U2 |
| 2 | UCC27517 | SOT-23-5 | U3, U4 |
| 1 | SYR838PKC SYR838 Silergy | SYR838PKC | U5 |
| 1 | SY8089 | SOT-23-5 | U6 |
| 1 | LP5907MFX-3.3 | SOT-23-5 | U7 |
| 1 | REF3030 | SOT-23 | U8 |
| 1 | LM5164DDA | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U9 |
| 1 | TPS54302 | SOT-23-6 | U10 |
| 2 | INA241A3xDDF | SOT-23-8 | U11, U27 |
| 2 | SGM8551XN | TSOT-23-5 | U12, U13 |
| 1 | AT24C08C-SSHM-T | SOIC-8_3.9x4.9mm_P1.27mm | U14 |
| 1 | TMP112xxDRL | SOT-563 | U15 |
| 1 | HPM6P41IPB1 | LQFP-100_14x14mm_P0.5mm_EP5.0x5.0mm | U16 |
| 2 | CA-IS3762HN CHIPANALOG | CA-IS3762HN | U19, U25 |
| 1 | TME-0505S | BXXXXS-1W隔离电源 | U20 |
| 1 | SIT3088ETK | HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm | U21 |
| 1 | TJA1044GTK/3Z | HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm | U22 |
| 2 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | U23, U26 |
| 1 | XC6206PxxxMR | SOT-23-3 | U24 |
| 4 | HYG080N10LS1C2 | TDSON-8-1 | Q1, Q2, Q3, Q4 |
Show 68 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AO3400A | SOT-23 | Q5, Q6 |
| 1 | 24MHz ±10ppm 6pF | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 4 | Conn_01x01 | 48A_Connector_PCB_3 | J1, J2, J3, J4 |
| 2 | SMA | SMA_Amphenol_901-144_Vertical | J5-PB1, J6-PB0 |
| 2 | Conn_01x03 | PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal | J7, J8 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_16P_On_Board | J9 |
| 3 | 排针 | PinHeader_1x02_P2.54mm_Vertical | J10, J12, J13 |
| 1 | Conn_ARM_JTAG_SWD_20 | IDC-Header_2x10_P2.54mm_Vertical | J11 |
| 1 | Buzzer_DummyPIn3 | Buzzer_5020_MetalHole | BZ1-PY3 |
| 4 | TestPoint_Probe | 测试点 | PA12, PA13, PA14, PA15 |
| 1 | ~ | 焊接式_TFT_1.14_135X240_13PIN | S1 |
| 1 | 焊盘 | SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 3 | Push_Button | LCSC_SW_SPST_PTS810 | SW2, SW3, SW4 |
| 4 | TestPoint_Probe | 测试点 | TP5, TP7, TP8, TP9 |
| 2 | LM5Z12VT1G | D_SOD-523 | D1, D4 |
| 12 | 1N4148WS | D_SOD-523 | D2, D3, D5, D6, D7, D8, D9, D10 +4 |
| 1 | DSS34 | D_SOD-123F | D11 |
| 2 | NUP2105L | SOT-23 | D16, D17 |
| 3 | LED | LED_0603_1608Metric | D18, D19, D20 |
| 3 | 100Ω@100MHz 2A | L_0603_1608Metric | FB1, FB2, FB3 |
| 1 | VER2923 | IND_VER2923_COC | L1 |
| 1 | 2.2uH | L_Changjiang_FNR252012S | L2 |
| 1 | 0.47uH | L_Changjiang_FNR252012S | L3 |
| 1 | 68uH,1.7A,3A | L_Chilisin_BMRB00060650 | L4 |
| 1 | 4.7uH,1.6A | L_1210_3225Metric | L5 |
| 2 | ACT45B-510-2P-TL003 | SDCW2012-2-900TF | L6, L7 |
| 40 | 100nF,50V | C_0603_1608Metric | C1, C2, C8, C9, C17, C18, C22, C29 +32 |
| 8 | 100V 100uF | CP_Radial_D10.0mm_P5.00mm | C3, C4, C5, C6, C11, C13, C14, C16 |
| 2 | 10uF,50V | C_1206_3216Metric | C7, C10 |
| 2 | 4.7uF,50V | C_0603_1608Metric | C12, C15 |
| 11 | 22uF,10V | C_0603_1608Metric | C19, C20, C21, C26, C28, C30, C41, C43 +3 |
| 4 | 1uF,10V | C_0603_1608Metric | C23, C24, C77, C79 |
| 1 | 22pF | C_0603_1608Metric | C25 |
| 6 | 4.7uF,10V | C_0603_1608Metric | C27, C61, C66, C85, C93, C97 |
| 1 | 100V 2.2uF | CP_Radial_D5.0mm_P2.00mm | C32 |
| 3 | 10uF,25V | C_0805_2012Metric | C33, C34, C35 |
| 1 | 2.2nF 50V | C_0603_1608Metric | C36 |
| 11 | 47pF,50V | C_0603_1608Metric | C38, C44, C47, C50, C51, C71, C72, C73 +3 |
| 1 | 1.2nF,50V | C_0603_1608Metric | C39 |
| 1 | 75pF | R_0603_1608Metric | C40 |
| 1 | 16V 47uF ±20% | CP_Radial_D5.0mm_P2.00mm | C42 |
| 2 | 6pF | C_0603_1608Metric | C53, C55 |
| 2 | SCC1808X102K502TS IHHEC | C_1808_4520Metric | C63, C78 |
| 1 | 1uF | C_0603_1608Metric | C75 |
| 6 | 100nF,10V | C_0603_1608Metric | C87, C90, C91, C92, C94, C96 |
| 1 | 10nF,10V | C_0603_1608Metric | C88 |
| 5 | 0Ω | R_0603_1608Metric | R1, R29, R32, R35, R66 |
| 8 | 33Ω | R_0603_1608Metric | R2, R3, R10, R11, R44, R47, R48, R84 |
| 2 | 120kΩ | R_0603_1608Metric | R4, R19 |
| 6 | 5.1kΩ | R_0603_1608Metric | R5, R20, R49, R50, R67, R68 |
| 5 | 10Ω | R_0603_1608Metric | R6, R7, R15, R16, R51 |
| 5 | 10kΩ | R_0603_1608Metric | R8, R9, R13, R14, R63 |
| 5 | 1mΩ 1W | R_0612_1632Metric | R12, R22, R23, R24, R25 |
| 8 | 100Ω | R_0603_1608Metric | R17, R18, R21, R26, R42, R43, R82, R83 |
| 6 | 1kΩ | R_0603_1608Metric | R27, R28, R30, R31, R59, R60 |
| 1 | 68k | R_0603_1608Metric | R33 |
| 1 | 15k | R_0603_1608Metric | R34 |
| 1 | 76.8k | R_0603_1608Metric | R36 |
| 1 | 357k | R_0603_1608Metric | R37 |
| 1 | 453k | R_0603_1608Metric | R38 |
| 1 | 50k | R_0603_1608Metric | R39 |
| 1 | 100k | R_0603_1608Metric | R40 |
| 1 | 13.3k | R_0603_1608Metric | R41 |
| 4 | 50Ω | R_0603_1608Metric | R52, R53, R54, R55 |
| 2 | 2kΩ | R_0603_1608Metric | R56, R57 |
| 3 | 5.1k | R_0603_1608Metric | R58, R61, R62 |
| 2 | 120Ω | R_1206_3216Metric | R64, R65 |
| 13 | 10k | R_0603_1608Metric | R69, R70, R71, R72, R73, R74, R75, R76 +5 |
HPM6P41 BB design files
The KiCad project lives in the Alipay1/HPM6P41_BB repository on GitHub; these links point at the commit this page was built from.
HPM6P41 BB: common questions
How big is the HPM6P41 BB PCB?
The HPM6P41 BB measures 100 × 80.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the HPM6P41 BB?
276 components, from 88 distinct parts. The full bill of materials is listed on this page.
Where can I download the HPM6P41 BB design files?
From the Alipay1/HPM6P41_BB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HPM6P41 BB design in my own project?
Yes, under the terms of its MIT license, which Alipay1 chose for the repository.