6 open source boards using the TJA1044GTK/3Z
Real designs built with the TJA1044GTK/3Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HPM6P41 BB
Alipay1
100 × 80.3 mm276 parts4LMIT14STM32
Moducard cm5-module
Dominik-Workshop
100 × 100 mm246 parts4LMIT5STM32
MMS3
ArthorH
100 × 50 mm156 parts4LNo license1STM32
ModuCard mms extension pdw board
X-Lemon-X
100 × 100 mm136 parts4LNo license0STM32
Vortac Panel
FoCTow
80 × 80.6 mm82 parts4LNo license2STM32
VORTAC REV1
FoCTow
39.2 × 33.4 mm75 parts4LNo license2
How designs wire the TJA1044GTK/3Z
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TJA1044GTK/3Z connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
- The VIO pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- The STB pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ.
- The CANL pin has a inductor on 2 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 80% · a signal 20% | — |
| VCCpin 3 | Connected to: 5V 100% |
|
| VIOpin 5 | Connected to: 3.3V 100% |
|
| CANLpin 6 | Connected to: A connector 60% |
|
| CANHpin 7 | Connected to: A connector 60% |
|
| STBpin 8 | Connected to: Signal 80% · GND 20% |
|
| EPpin 9 | Connected to: GND 80% · a signal 20% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HPM6P41 BB by Alipay1, Moducard cm5-module by Dominik-Workshop, Vortac Panel by FoCTow and MMS3 by ArthorH.
The TJA1044GTK/3Z in open source designs
The gallery holds 6 open source boards using the TJA1044GTK/3Z from 5 GitHub repositories; a typical one measures about 100 × 80.4 mm and carries around 146 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is HPM6P41 BB by Alipay1.
Parts used alongside the TJA1044GTK/3Z
Microcontrollers on boards using the TJA1044GTK/3Z
TJA1044GTK/3Z: common questions
Where can I find a TJA1044GTK/3Z reference design?
Each of the 6 boards on this page is a real design using the TJA1044GTK/3Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TJA1044GTK/3Z VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the TJA1044GTK/3Z.
What decoupling capacitors do designs use on the TJA1044GTK/3Z VIO pin?
The VIO pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TJA1044GTK/3Z.
What resistor goes on the TJA1044GTK/3Z STB pin?
The STB pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the TJA1044GTK/3Z.
What parts are used alongside the TJA1044GTK/3Z?
The CH334P, FSUSB42UMX, STM32F103CBTx and TPD2EUSB30DRTR-TP appear in the most repositories here.
Which microcontrollers do boards using the TJA1044GTK/3Z use?
Most are built on STM32 (5).
How big is a typical board using the TJA1044GTK/3Z?
The median is 100 × 80.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the TJA1044GTK/3Z?
By GitHub stars, HPM6P41 BB by Alipay1, with 14 stars.
Can I simulate one of these boards using the TJA1044GTK/3Z before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.