7 open source boards using the REF3030
Real designs built with the REF3030, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HPM6P41 BB
Alipay1
100 × 80.3 mm276 parts4LMIT14RP2040/RP2350
Tapeshnik proto
svofski
84.3 × 64.5 mm132 parts2LNo license14SYNTH
svenssonjoel
83 × 54 mm81 parts2LGPL-3.01STM32
Placed
danhmanu
100 × 80 mm310 parts2LNo license0Afe 230v 16a
kyuditsky
67.7 × 86.4 mm69 parts2LNo license0STM32
PLC STM32 Modbus
danhmanu
100 × 80 mm310 parts2LNo license0ESP32
Ledian support board
aleclearmind
88.7 × 55.6 mm88 parts2LNo license0
How designs wire the REF3030
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the REF3030 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 3.3V on 5 of 6 designs.
- The OUT pin is tied to 3V on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 3.3V 83% · a signal 17% |
|
| OUTpin 2 | Connected to: 3V 83% · a signal 17% | — |
| GNDpin 3 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HPM6P41 BB by Alipay1, Tapeshnik proto by svofski, SYNTH by svenssonjoel and Ledian support board by aleclearmind.
The REF3030 in open source designs
The gallery holds 7 open source boards using the REF3030 from 6 GitHub repositories; a typical one measures about 88.7 × 80 mm and carries around 132 components.
86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is HPM6P41 BB by Alipay1.
Microcontrollers on boards using the REF3030
REF3030: common questions
Where can I find a REF3030 reference design?
Each of the 7 boards on this page is a real design using the REF3030. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the REF3030 IN pin connected?
The IN pin is tied to 3.3V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the REF3030.
How is the REF3030 OUT pin connected?
The OUT pin is tied to 3V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the REF3030.
Which microcontrollers do boards using the REF3030 use?
Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the REF3030?
The median is 88.7 × 80 mm, and 86% are two-layer designs.
What is the most popular open source board using the REF3030?
By GitHub stars, HPM6P41 BB by Alipay1, with 14 stars.
Can I simulate one of these boards using the REF3030 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.