8 open source boards using the DRV8311HRRWR
Real designs built with the DRV8311HRRWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
QNOB V6
alperbasarn
47.6 × 47.6 mm179 parts2LNo license0RP2040/RP2350
OWL - Rotor v2
sedlak477
60 × 60 mm104 parts4LCERN-OHL-P-2.00STM32
Knuckle
HeyPCB
35 × 35 mm44 parts6LCERN-OHL-S-2.00Biym board
peterpolidoro
50.8 × 34 mm39 parts2LGPL-3.00CACKLE-Driver-DRV8311 Motor Driver
techy-robot
15 × 15 mm25 parts4LCC-BY-NC-4.00STM32
Stm32g070 and DRV8311 single motor board - V1 Alpha
techy-robot
38.8 × 42.1 mm55 parts4LCERN-OHL-S-2.012DRV8311 on motor driver
techy-robot
11 × 11 mm11 parts4LCERN-OHL-S-2.012Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00
How designs wire the DRV8311HRRWR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the DRV8311HRRWR connects to, and the resistors, capacitors and other passives placed on it.
- The VIN_AVDD pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 10 µF).
- The VM pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 10 µF).
- The AVDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
- The VIN_AVDD pin has a series capacitor on 5 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CPpin 6 | Connected to: Signal 100% |
|
| VIN_AVDDpin 7 | Connected to: A connector 43% · VDD 29% |
|
| VMpin 8 | Connected to: VDD 43% · a signal 43% |
|
| PGNDpin 9 | Connected to: GND 86% | — |
| AGNDpin 16 | Connected to: GND 100% | — |
| AVDDpin 17 | Connected to: 3.3V 57% · a signal 29% |
|
| INLApin 18 | Connected to: Signal 67% · 3.3V 33% |
|
| INLBpin 19 | Connected to: Signal 67% · 3.3V 33% |
|
| INLCpin 20 | Connected to: Signal 67% · 3.3V 33% |
|
| GAINpin 21 | Connected to: Not connected 67% · a signal 33% |
|
| SLEWpin 22 | Connected to: Not connected 83% · GND 17% | — |
| SLEEP_Npin 24 | Connected to: Signal 100% |
|
| POWERPADpin 25 | Connected to: GND 100% | — |
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DRV8311 on motor driver by techy-robot, QNOB V6 by alperbasarn, Amod b by gallicchio and Knuckle by HeyPCB.
The DRV8311HRRWR in open source designs
The gallery holds 8 open source boards using the DRV8311HRRWR from 7 GitHub repositories; a typical one measures about 43.2 × 38.5 mm and carries around 50 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is Stm32g070 and DRV8311 single motor board - V1 Alpha by techy-robot.
Parts used alongside the DRV8311HRRWR
Microcontrollers on boards using the DRV8311HRRWR
What boards using the DRV8311HRRWR are built for
DRV8311HRRWR: common questions
Where can I find a DRV8311HRRWR reference design?
Each of the 8 boards on this page is a real design using the DRV8311HRRWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DRV8311HRRWR VIN_AVDD pin connected?
The VIN_AVDD pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the DRV8311HRRWR.
What decoupling capacitors do designs use on the DRV8311HRRWR VM pin?
The VM pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the DRV8311HRRWR.
What decoupling capacitors do designs use on the DRV8311HRRWR AVDD pin?
The AVDD pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the DRV8311HRRWR.
Which microcontrollers do boards using the DRV8311HRRWR use?
Most are built on STM32 (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the DRV8311HRRWR?
The median is 43.2 × 38.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the DRV8311HRRWR?
By GitHub stars, Stm32g070 and DRV8311 single motor board - V1 Alpha by techy-robot, with 12 stars.
Can I simulate one of these boards using the DRV8311HRRWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.