ADCS
Amr-H25·CubeSat-EarthObservation·Hardware/SubSystems PCBs/ADCS/ADCS.kicad_pcb
About the ADCS PCB
ADCS is an open source PCB design by Amr-H25, published on GitHub. It is a 2-layer board measuring 46.4 × 60.2 mm, with 20 components from 14 distinct parts.
Other key parts include the YAAJ_BluePill and LM35-LP. By type, the board carries 10 connectors, 8 resistors and 2 ICs.
It belongs with the science & space designs in this gallery.
From the project
A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.
Main components on the ADCS
ADCS bill of materials (BOM)
20 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YAAJ_BluePill | YAAJ_BluePill_1 | U1 |
| 1 | LM35-LP | TO-92_Inline | U2 |
| 1 | UART_Debug | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | MPU 6050 | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | GPS | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LDR_F | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | LDR_B | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | LDR_L | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | LDR_R | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | GPIO | PinHeader_2x26_P2.54mm_Vertical | J8 |
| 1 | H Bridge | PinSocket_1x06_P2.54mm_Horizontal | J9 |
| 1 | Motor_Power | TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J10 |
| 6 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 2 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7, R8 |
ADCS design files
The KiCad project lives in the Amr-H25/CubeSat-EarthObservation repository on GitHub; these links point at the commit this page was built from.
ADCS: common questions
How big is the ADCS PCB?
The ADCS measures 46.4 × 60.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ADCS?
20 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the ADCS design files?
From the Amr-H25/CubeSat-EarthObservation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ADCS design in my own project?
The repository has no license, so all rights stay with Amr-H25. Use it as a reference, and ask the author before reusing the design.
More boards in CubeSat-EarthObservation
Similar boards
PiFinder4
brickbots
98 × 75 mm150 parts4LGPL-3.0250PiFinder smt
brickbots
93.8 × 64.2 mm47 parts2LGPL-3.0250Batteryboard
pycubed
95.9 × 90.2 mm28 parts2LNo license97CubeSatKit StackBoard
imciner2
90.2 × 95.9 mm3 partsCC-BY-SA-4.065Fox-1-MPPT
FaradayRF
95 × 95 mm453 parts4LCustom license62Usbc power
SoukeyCircuits
30 × 79 mm41 parts2LGPL-3.055