Payload & COMMS

Amr-H25·CubeSat-EarthObservation·Hardware/SubSystems PCBs/Payload & COMMS/Payload & COMMS.kicad_pcb

Payload & COMMS PCB layout, top view — open source ESP32 board by Amr-H25

About the Payload & COMMS PCB

Payload & COMMS is an open source ESP32 PCB design by Amr-H25, published on GitHub. It is a 2-layer board measuring 61.6 × 55.9 mm, with 12 components from 9 distinct parts.

Its main chip is the ESP32-CAM, from the ESP32 family. Other key parts include the LM741 and YAAJ_BluePill. By type, the board carries 5 resistors, 4 connectors and 3 ICs.

It belongs with the science & space designs in this gallery.

From the project

A simulated CubeSat for Earth observation: captures images and transmits them to a ground station for processing and analysis. Final-year graduation project at Helwan University.

Main components on the Payload & COMMS

Payload & COMMS bill of materials (BOM)

12 components, 9 distinct parts.

QtyPartRefs
1
ESP32-CAM
U2
1
LM741
U3
1
YAAJ_BluePill
U4
1
Conn_01x05_Socket
J1
1
GPIO
J2
1
Conn_01x04_Socket
J3
1
UART_DEBUG
J4
4
10K
R1, R2, R3, R4
1
100k
R5

Payload & COMMS design files

The KiCad project lives in the Amr-H25/CubeSat-EarthObservation repository on GitHub; these links point at the commit this page was built from.

Payload & COMMS: common questions

What microcontroller does the Payload & COMMS use?

The Payload & COMMS is built around the ESP32-CAM, from the ESP32 family.

How big is the Payload & COMMS PCB?

The Payload & COMMS measures 61.6 × 55.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Payload & COMMS?

12 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Payload & COMMS design files?

From the Amr-H25/CubeSat-EarthObservation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Payload & COMMS design in my own project?

The repository has no license, so all rights stay with Amr-H25. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Payload & COMMS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in CubeSat-EarthObservation

Similar boards