PMW3360
Andy46·micromouse-pcb·schematics/sensor_pcb/sensor_pcb.kicad_pcb
About the PMW3360 PCB
PMW3360 is an open source PCB design by Andy46, published on GitHub. It is a 2-layer board measuring 28 × 32 mm, with 13 components from 11 distinct parts.
Other key parts include the PMW3360DM-T2QU and TLV74318PDBVR. By type, the board carries 5 capacitors, 4 resistors, 2 ICs, 1 connector and 1 jumper.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
Repository to host the PCB design of the micromouse robot
Main components on the PMW3360
PMW3360 bill of materials (BOM)
13 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PMW3360DM-T2QU | PMW3360DM-T2QU 16Pin | U1 |
| 1 | TLV74318PDBVR | SOT-23-5 | U2 |
| 1 | Conn_01x08 | JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J1 |
| 1 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | 4.7uF/10V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 2 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 1 | 22nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 39R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 28k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
PMW3360 design files
The KiCad project lives in the Andy46/micromouse-pcb repository on GitHub; these links point at the commit this page was built from.
PMW3360: common questions
How big is the PMW3360 PCB?
The PMW3360 measures 28 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PMW3360?
13 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the PMW3360 design files?
From the Andy46/micromouse-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PMW3360 design in my own project?
The repository has no license, so all rights stay with Andy46. Use it as a reference, and ask the author before reusing the design.
More boards in micromouse-pcb
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k