9 open source boards using the TLV74318PDBVR
Real designs built with the TLV74318PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pmw3360 pcb ffc
siderakb
27 × 22.5 mm13 parts2LCERN-OHL-P-2.0194Pmw3610
siderakb
23.5 × 31.5 mm15 parts2LCERN-OHL-P-2.0120Paw3395
badjeff
15.5 × 28 mm18 parts2LCERN-OHL-P-2.038Pmw3610
badjeff
15.5 × 29.9 mm15 parts2LCERN-OHL-P-2.027AVR/Arduino
Latest
dennisss
32 × 32 mm89 parts6LApache-2.0381Pmw3360 pcb jst
siderakb
27 × 28 mm13 parts2LCERN-OHL-P-2.0194PMW3360
Andy46
28 × 32 mm13 parts2LNo license0Pmw3360 pcb pinheader
siderakb
23.5 × 33 mm12 parts2LCERN-OHL-P-2.0194Pmw3360 pcb jst
sfunderbots
27 × 28 mm12 parts2LNo license0
How designs wire the TLV74318PDBVR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV74318PDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The NC pin has a capacitor to GND on 6 of 7 designs, most often 22 nF.
- The OUT pin is tied to 1.8V on 7 of 7 designs.
- The IN pin is tied to VIN on 5 of 7 designs (a signal on 2).
- The NC pin has a pull-up to VDD on 3 of 7 designs, most often 28 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: VIN 71% · a signal 29% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Signal 86% |
|
| OUTpin 5 | Connected to: 1.8V 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Latest by dennisss, Pmw3360 pcb ffc by siderakb, Pmw3610-pcb by siderakb and Paw3395-pcb by badjeff.
The TLV74318PDBVR in open source designs
The gallery holds 9 open source boards using the TLV74318PDBVR from 7 GitHub repositories; a typical one measures about 27 × 29.9 mm and carries around 13 components.
89% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.
The most starred is Latest by dennisss.
Parts used alongside the TLV74318PDBVR
Microcontrollers on boards using the TLV74318PDBVR
What boards using the TLV74318PDBVR are built for
TLV74318PDBVR: common questions
Where can I find a TLV74318PDBVR reference design?
Each of the 9 boards on this page is a real design using the TLV74318PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV74318PDBVR NC pin connected?
The NC pin has a capacitor to GND on 6 of 7 designs, most often 22 nF. Counted from the KiCad layouts of 7 open source designs using the TLV74318PDBVR.
How is the TLV74318PDBVR OUT pin connected?
The OUT pin is tied to 1.8V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV74318PDBVR.
How is the TLV74318PDBVR IN pin connected?
The IN pin is tied to VIN on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the TLV74318PDBVR.
Which microcontrollers do boards using the TLV74318PDBVR use?
Most are built on AVR/Arduino (1).
How big is a typical board using the TLV74318PDBVR?
The median is 27 × 29.9 mm, and 89% are two-layer designs.
What is the most popular open source board using the TLV74318PDBVR?
By GitHub stars, Latest by dennisss, with 381 stars.
Can I simulate one of these boards using the TLV74318PDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.