Project-Drone

angelowickramasinghe·Project-Drone·AeroFC/AeroFC.kicad_pcb

Project-Drone PCB layout, top view — open source ESP32 board by angelowickramasinghe

About the Project-Drone PCB

Project-Drone is an open source ESP32 PCB design by angelowickramasinghe, published on GitHub. It is a 2-layer board measuring 100 × 75 mm, with 57 components from 28 distinct parts.

Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the MPU-6050, BMP280, AP2112K-3.3TRG1 and CH340C. By type, the board carries 19 resistors, 14 capacitors, 7 connectors, 5 ICs, 4 transistors and 4 diodes.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

AeroFC-1S 1S brushed micro-quad flight controller (KiCad) — schematic, PCB, Gerbers, LCSC BOM

1S brushed micro-quad flight controller (KiCad 10).

Main components on the Project-Drone

Project-Drone bill of materials (BOM)

57 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E-N4
U1
1
MPU-6050
U2
1
BMP280
U3
1
AP2112K-3.3TRG1
AP2112K-3.3
U4
1
CH340C
U5
4
AO3400A
Q1, Q2, Q3, Q4
1
105017-0001
USB_Micro_B
J1
1
B2B-PH-K-S
BAT_1S
J2
1
M1
J3
1
M2
J4
1
M3
J5
1
M4
J6
1
EXP_I2C
J7
1
FSMD1206-300-R
3A_PTC
F1
1
TS-1187A-B-A-B
BOOT
SW1
1
19-217/GHC-YR1S2/3T
GREEN
LED1
1
19-217/R6C-AL1M2VY/3T
RED
LED2
4
SS14
D1, D2, D3, D4
3
CL21A106KOQNNNE
10uF
C1, C2, C6
9
CL10B104KB8NNNC
100nF
C3, C4, C5, C7, C9, C11, C12, C13 +1
Show 8 more
QtyPartRefs
1
CL10A105KA8NNNC
1uF
C8
1
CL10B103KB8NNNC
10nF
C10
4
0603WAF1002T5E
10k
R1, R3, R4, R5
1
0603WAF2202T5E
22k
R2
2
0603WAF1001T5E
1k
R6, R7
2
0603WAF4701T5E
4.7k
R8, R9
6
0603WAF0000T5E
0R
R10, R11, R20, R21, R22, R23
4
0603WAF1000T5E
100R
R12, R13, R14, R15

Project-Drone design files

The KiCad project lives in the angelowickramasinghe/Project-Drone repository on GitHub; these links point at the commit this page was built from.

Project-Drone: common questions

What microcontroller does the Project-Drone use?

The Project-Drone is built around the ESP32-WROOM-32E-N4, from the ESP32 family.

How big is the Project-Drone PCB?

The Project-Drone measures 100 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Project-Drone?

57 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Project-Drone design files?

From the angelowickramasinghe/Project-Drone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Project-Drone design in my own project?

The repository has no license, so all rights stay with angelowickramasinghe. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Project-Drone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards