9 open source boards using the TXS0101DBV
Real designs built with the TXS0101DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Cypher
westfoxtrot
370.2 × 106 mm324 parts2LCC-BY-SA-4.020ESP32
Sovereign Bunny Stack
Citrullin
87 × 88.9 mm169 parts4LNo license4System testbed
OpenAir-Lab
57 × 41 mm166 parts4LMIT3STM32
87keyboard
danielpclin
347.7 × 123.8 mm403 parts2LNo license0ESP32
Hotplate
Keyaan-07
60 × 45 mm74 parts4LMIT0ESP32
Smart-Home-Automation-Controller
dhanush-darpan
168 × 61 mm68 parts2LNo license0ESP32
Control Board V2.1
AnotherBuildCorner
93 × 67.5 mm42 parts2LNo license0Farfadet - Differential transceiver for uC
tommag
19 × 36 mm14 parts2LNo license2Rf switch modulino
OpenAir-Lab
25.4 × 41.4 mm21 parts4LMIT3
How designs wire the TXS0101DBV
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TXS0101DBV connects to, and the resistors, capacitors and other passives placed on it.
- The VCCB pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 88% |
|
| GNDpin 2 | Connected to: GND 88% | — |
| VCCBpin 6 | Connected to: 5V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cypher pcb by westfoxtrot, Sovereign Bunny Stack by Citrullin, Rf switch modulino by OpenAir-Lab and Farfadet - Differential transceiver for uC by tommag.
The TXS0101DBV in open source designs
The gallery holds 9 open source boards using the TXS0101DBV from 8 GitHub repositories; a typical one measures about 87 × 61 mm and carries around 74 components.
56% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Cypher pcb by westfoxtrot.
What boards using the TXS0101DBV are built for
TXS0101DBV: common questions
Where can I find a TXS0101DBV reference design?
Each of the 9 boards on this page is a real design using the TXS0101DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXS0101DBV VCCB pin?
The VCCB pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the TXS0101DBV.
Which microcontrollers do boards using the TXS0101DBV use?
Most are built on ESP32 (4) and STM32 (2).
How big is a typical board using the TXS0101DBV?
The median is 87 × 61 mm, and 56% are two-layer designs.
What is the most popular open source board using the TXS0101DBV?
By GitHub stars, Cypher pcb by westfoxtrot, with 20 stars.
Can I simulate one of these boards using the TXS0101DBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.