NadDeska
About the NadDeska PCB
NadDeska is an open source FPGA PCB design by AntoninCerny, published on GitHub. It is a 4-layer board measuring 130 × 100 mm, with 292 components from 73 distinct parts.
Its main chip is the LCMXO-7000HC-6TG-144C, from the FPGA family. Other key parts include the USBLC6-2SC6, TDC_7200, MAX9939, TLV3501AID and DAC60501. By type, the board carries 125 capacitors, 87 resistors, 27 ICs, 20 diodes, 13 transistors and 7 connectors.
It belongs with the test & measurement designs in this gallery.
From the project
repository for PCB of a ultrasonic measurement ring
Main components on the NadDeska
NadDeska bill of materials (BOM)
292 components, 73 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | USBLC6-2SC6 | SOT-23-6 | U1, U24, U26, U27 |
| 1 | TDC_7200 | TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | MAX9939 | uMAX 10 pin | U3 |
| 1 | TLV3501AID | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | DAC60501 | VSSOP-10_3x3mm_P0.5mm | U5 |
| 1 | LM339 | TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | ADC10065 | TSSOP-28_4.4x9.7mm_P0.65mm | U7 |
| 4 | MIC4604YM | SOIC-8_3.9x4.9mm_P1.27mm | U8, U9, U10, U11 |
| 1 | OKI-78SR-3.3_1.5-W36H-C | Converter_DCDC_Murata_OKI-78SR_Horizontal | U12 |
| 1 | OKI-78SR-12_1.0-W36H-C | Converter_DCDC_Murata_OKI-78SR_Horizontal | U13 |
| 1 | THS4521IDGK | VSSOP-8_3.0x3.0mm_P0.65mm | U14 |
| 1 | LM34966 | HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3.1mm_ThermalVias | U15 |
| 1 | ~ | SOIC-8_3.9x4.9mm_P1.27mm | U16 |
| 1 | NE5532 | SOIC-8_3.9x4.9mm_P1.27mm | U17 |
| 1 | LM393 | TSSOP-8_4.4x3mm_P0.65mm | U18 |
| 4 | TMUX7219 | VSSOP-8_3.0x3.0mm_P0.65mm | U19, U20, U21, U22 |
| 1 | MCP1501-25xCH | SOT-23-6 | U23 |
| 1 | ADP7142ARDZ-3.3 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U25 |
| 9 | DMN6069SE | SOT-223-3_TabPin2 | Q1, Q2, Q3, Q4, Q7, Q8, Q9, Q10 +1 |
| 3 | Q_NMOS_GSD | SOT-23_Handsoldering | Q5, Q6, Q12 |
Show 53 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Q_PMOS_DGS | SOT-223-3_TabPin2 | Q14 |
| 1 | 16MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | X1 |
| 1 | LCMXO-7000HC-6TG-144C | TQFP-144_20x20mm_P0.5mm | X2 |
| 1 | 71918-140LF | CON40_2X20_USZ_FCI_GLE | J1 |
| 4 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J2, J3, J6, J7 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 2 | Polyfuse_Small | Fuse_2920_7451Metric | F1, F2 |
| 2 | Polyfuse_Small | Fuse_1206_3216Metric | F3, F4 |
| 5 | D | D_SOD-123 | D1, D2, D3, D5, D6 |
| 1 | V8PA6HM3/I | Vishay_SMPA | D4 |
| 10 | BAT54S | SOT-23 | D14, D16, D17, D18, D19, D20, D21, D22 +2 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D24, D26, D27 |
| 1 | SML4740A-E3/61 | D_SMA_Handsoldering | D28 |
| 6 | BLM21BD601SN1D | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2, FB3, FB4, FB5, FB6 |
| 1 | 6.8u | L_Bourns-SRN8040_8x8.15mm | L2 |
| 2 | 120p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C8 |
| 55 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5, C6, C10, C16, C17, C18, C19 +47 |
| 23 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C7, C12, C13, C14, C27, C29, C30 +15 |
| 1 | C | C_0603_1608Metric | C4 |
| 18 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C11, C44, C64, C65, C68, C69, C71 +10 |
| 10 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C26, C28, C31, C32, C62, C94, C95 +2 |
| 2 | 100p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C61 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C35 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C36 |
| 1 | 220p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C56 |
| 1 | 22n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C57 |
| 1 | 220n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C59 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C60, C88 |
| 4 | 200p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C97, C98, C99, C100 |
| 1 | 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C101 |
| 2 | 2u2 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C102, C104 |
| 4 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R9, R10 |
| 11 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R6, R11, R12, R13, R51, R73 +3 |
| 7 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8, R21, R23, R45, R47, R58 |
| 2 | 20 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R14 |
| 36 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R20, R24, R25, R26, R27, R28, R29 +28 |
| 1 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17 |
| 4 | 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19, R72, R86 |
| 1 | 8k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R46, R59, R67 |
| 1 | 24k9 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R48 |
| 1 | 11k3 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R49 |
| 1 | 49k9 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R50 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R52 |
| 2 | 10m | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53, R54 |
| 3 | 12 | R_0603_1608Metric | R60, R83, R84 |
| 1 | R | R_0603_1608Metric | R61 |
| 4 | 100 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R62, R63, R64, R65 |
| 1 | 6k8 | R_0603_1608Metric | R66 |
| 1 | 4k7 | R_0603_1608Metric | R71 |
| 1 | R | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R88 |
NadDeska design files
The KiCad project lives in the AntoninCerny/NadDeska repository on GitHub; these links point at the commit this page was built from.
- Layoutultrasonic_V3_HW.kicad_pcb
- Schematicultrasonic_V3_HW.kicad_sch
NadDeska: common questions
What microcontroller does the NadDeska use?
The NadDeska is built around the LCMXO-7000HC-6TG-144C, from the FPGA family.
How big is the NadDeska PCB?
The NadDeska measures 130 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the NadDeska?
292 components, from 73 distinct parts. The full bill of materials is listed on this page.
Where can I download the NadDeska design files?
From the AntoninCerny/NadDeska repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NadDeska design in my own project?
The repository has no license, so all rights stay with AntoninCerny. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the NadDeska without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGABase board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2k
FPGAThunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3k
FPGAUsb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3k
FPGATomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1k
FPGAIcepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1828
FPGASd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717