5 open source boards using the TLV3501AID
Real designs built with the TLV3501AID, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
NadDeska
AntoninCerny
130 × 100 mm292 parts4LNo license0STM32
Stm32-fpga oscilloscope
HexFud
160 × 100 mm115 parts4LNo license0RP2040/RP2350
Adsb devboard
vighnesh-sawant
57.9 × 37.5 mm113 parts4LMIT0RayCouplers
RFStateSide
70 × 102 mm48 parts2LCERN-OHL-P-2.00MicroDeflect
tullulah
100 × 100 mm94 parts2LGPL-3.03
How designs wire the TLV3501AID
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV3501AID connects to, and the resistors, capacitors and other passives placed on it.
- The + pin has a series resistor on 4 of 5 designs, most often 1 kΩ (then 20 Ω).
- The V+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 2.2 µF).
- The V- pin is tied to GND on 4 of 5 designs.
- The - pin has a capacitor to GND on 3 of 5 designs, most often 100 pF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 5 | Connected to: Not connected 100% | — |
| -pin 2 | Connected to: Signal 100% |
|
| +pin 3 | Connected to: Signal 100% |
|
| V-pin 4 | Connected to: GND 80% · VIN_GND 20% | — |
| Pin 6 | Connected to: Signal 100% |
|
| V+pin 7 | Connected to: 3.3V 80% · a signal 20% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MicroDeflect by tullulah, NadDeska by AntoninCerny, Stm32-fpga oscilloscope by HexFud and RayCouplers by RFStateSide.
The TLV3501AID in open source designs
The gallery holds 5 open source boards using the TLV3501AID from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 113 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is MicroDeflect by tullulah.
Parts used alongside the TLV3501AID
Microcontrollers on boards using the TLV3501AID
What boards using the TLV3501AID are built for
TLV3501AID: common questions
Where can I find a TLV3501AID reference design?
Each of the 5 boards on this page is a real design using the TLV3501AID. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLV3501AID + pin?
The + pin has a series resistor on 4 of 5 designs, most often 1 kΩ (then 20 Ω). Counted from the KiCad layouts of 5 open source designs using the TLV3501AID.
What decoupling capacitors do designs use on the TLV3501AID V+ pin?
The V+ pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the TLV3501AID.
How is the TLV3501AID V- pin connected?
The V- pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV3501AID.
Which microcontrollers do boards using the TLV3501AID use?
Most are built on FPGA (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TLV3501AID?
The median is 100 × 100 mm, and 40% are two-layer designs.
What is the most popular open source board using the TLV3501AID?
By GitHub stars, MicroDeflect by tullulah, with 3 stars.
Can I simulate one of these boards using the TLV3501AID before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.