VERN Air-Quality-Meter

antoniosimuncic·VERN_Air-Quality-Meter·Hardware/100008_hw-vern-aqm/100008_hw-vern-aqm.kicad_pcb

VERN Air-Quality-Meter PCB layout, top view — open source ESP32 board by antoniosimuncic

About the VERN Air-Quality-Meter PCB

VERN Air-Quality-Meter is an open source ESP32 PCB design by antoniosimuncic, published on GitHub. It is a 4-layer board measuring 98 × 56.3 mm, with 78 components from 27 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3, CP2102N-Axx-xQFN24, SCD40-D-R2 and DPS368. By type, the board carries 32 resistors, 19 capacitors, 9 diodes, 8 connectors, 5 ICs and 2 transistors.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

University Project, Compact Desktop Air Quality Monitor. Hardware+Firmware+Software

Air pollution is becoming an increasingly serious environmental and health issue, affecting people's quality of life worldwide. Harmful particles and gases in the atmosphere can lead to numerous health problems, making air quality monitoring essential for protecting health and the environment.

The goal of this project is to develop a Smart Air Quality Monitor, a smart meteorological station that integrates advanced sensors to measure airborne dust particles, CO2, humidity, pressure, and temperature. This device would enable real-time air quality monitoring, providing users with critical…

VERN Air-Quality-Meter, from the project README
From the project README

Main components on the VERN Air-Quality-Meter

VERN Air-Quality-Meter bill of materials (BOM)

78 components, 27 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP32-S3-WROOM-1
U2
1
CP2102N-Axx-xQFN24
U3
1
SCD40-D-R2
U4
1
DPS368
U5
2
BC817
Q1, Q2
1
Conn_01x14_Socket
J1
1
USB4220-03-1000-C
J2
1
Conn_01x06_MountingPin
J3
1
Conn_01x03_Pin
J4
1
Conn_01x06_Socket
J5
1
Conn_01x04_Socket
J6
1
Conn_01x05_Pin
J7
1
Conn_01x04_MountingPin
J8
1
Polyfuse
F1
2
SW_Push
SW1, SW2
1
ESD5Z3V3
D1
4
ESD321DYAR
D2, D3, D4, D5
4
LED
D6, D7, D8, D9
1
1u
C1
Show 7 more
QtyPartRefs
7
10u
C2, C3, C5, C6, C10, C11, C14
11
100n
C4, C7, C8, C9, C12, C13, C15, C16 +3
12
0R0
R2, R5, R6, R7, R10, R14, R21, R22 +4
3
5k1
R3, R4, R18
2
100R
R8, R9
12
10k
R11, R12, R13, R15, R16, R17, R19, R23 +4
3
1k
R20, R28, R29

VERN Air-Quality-Meter design files

The KiCad project lives in the antoniosimuncic/VERN_Air-Quality-Meter repository on GitHub; these links point at the commit this page was built from.

VERN Air-Quality-Meter: common questions

What microcontroller does the VERN Air-Quality-Meter use?

The VERN Air-Quality-Meter is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the VERN Air-Quality-Meter PCB?

The VERN Air-Quality-Meter measures 98 × 56.3 mm, has 4 copper layers and is 1.6262 mm thick.

How many components are on the VERN Air-Quality-Meter?

78 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the VERN Air-Quality-Meter design files?

From the antoniosimuncic/VERN_Air-Quality-Meter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the VERN Air-Quality-Meter design in my own project?

The repository has no license, so all rights stay with antoniosimuncic. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VERN Air-Quality-Meter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards