9 open source boards using the DPS368
Real designs built with the DPS368, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
PickleRick
icl-rocketry
100 × 37 mm196 parts6LMIT2ESP32
Altimeter
icl-rocketry
37.5 × 25 mm80 parts4LNo license1ESP32
Windsensor
kristofkatzenberger
70 × 70 mm123 parts4LMIT0ESP32
Hard-EnvSens
IgorFJensen
60 × 60 mm102 parts2LNo license0ESP32
VERN Air-Quality-Meter
antoniosimuncic
98 × 56.3 mm78 parts4LNo license0STM32
Chaac
alvarop
34 × 60 mm67 parts4LMIT21ESP32
Altimeter thin
icl-rocketry
54.5 × 19 mm80 parts4LNo license1ESP32
Артёмитер
icl-rocketry
54.5 × 18 mm79 parts4LNo license1ESP32
Altimeter super thin
icl-rocketry
54.5 × 18 mm79 parts4LNo license1
How designs wire the DPS368
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the DPS368 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The CSB pin is left unconnected on 4 of 6 designs (a signal on 2).
- The SDI pin has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 7 | Connected to: GND 100% | — |
| CSBpin 2 | Connected to: Not connected 67% · a signal 33% | — |
| SDIpin 3 | Connected to: The microcontroller 67%, H3LIS331DLTR 33%, ICM-20608-G 33% |
|
| SCKpin 4 | Connected to: The microcontroller 67%, H3LIS331DLTR 33%, ICM-20608-G 33% |
|
| VDDIOpin 6 | Connected to: 3.3V 100% |
|
| VDDpin 8 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Chaac by alvarop, PickleRick by icl-rocketry, Артёмитер by icl-rocketry and VERN Air-Quality-Meter by antoniosimuncic.
The DPS368 in open source designs
The gallery holds 9 open source boards using the DPS368 from 6 GitHub repositories; a typical one measures about 54.5 × 37 mm and carries around 80 components.
89% use four copper layers or more, and 33% carry an open source license.
The most starred is Chaac by alvarop.
Parts used alongside the DPS368
What boards using the DPS368 are built for
DPS368: common questions
Where can I find a DPS368 reference design?
Each of the 9 boards on this page is a real design using the DPS368. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the DPS368 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the DPS368.
What decoupling capacitors do designs use on the DPS368 VDD pin?
The VDD pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the DPS368.
How is the DPS368 CSB pin connected?
The CSB pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the DPS368.
What parts are used alongside the DPS368?
The ESP32-S3, ESP32-S3-WROOM-1, H3LIS331DLTR, ICM-20608-G and MMC5983MA appear in the most repositories here.
Which microcontrollers do boards using the DPS368 use?
Most are built on ESP32 (8) and STM32 (1).
How big is a typical board using the DPS368?
The median is 54.5 × 37 mm, and 11% are two-layer designs.
What is the most popular open source board using the DPS368?
By GitHub stars, Chaac by alvarop, with 21 stars.
Can I simulate one of these boards using the DPS368 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.