D34-pwr
aquarat·cat-feeder·electronics/d34/d34-pwr/d34-pwr.kicad_pcb
About the D34-pwr PCB
D34-pwr is an open source PCB design by aquarat, published on GitHub under the Custom license license. It is a 2-layer board measuring 81 × 47 mm, with 24 components from 20 distinct parts.
Other key parts include the TSR 2-24120N, TSR 1-2450 and SSW-108-01-T-S. By type, the board carries 7 connectors, 7 capacitors, 3 ICs, 2 fuses, 2 resistors and 1 transistor.
From the project
A high performance cat-food-feeder.
Status: generated, ERC/DRC-checked design files. Not fabricated, not soldered, not powered, no firmware.
- Rationale, power budget, TVS analysis and open questions: kb/d34-controller.md. - Decision: D34.
Bare 2-layer boards (1.6 mm FR-4, 1 oz), fabrication only. Every part is through-hole or a plug-in module. Two upload packages per card: -pcbtrain.zip (PCB Train / Newbury Electronics, UK; recommended UK fab) and -jlcpcb-gerbers.zip (JLCPCB, much cheaper). Components: RS Components UK except one Farnell line and two module retailers; the sourced BOM, totals and fab comparison are in…

Main components on the D34-pwr
D34-pwr bill of materials (BOM)
24 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSR 2-24120N | Converter_DCDC_TRACO_TSR2-24xxN_TSR2-24xxxN_THT | U1 |
| 1 | TSR 1-2450 | Converter_DCDC_TRACO_TSR-1_THT | U2 |
| 1 | SSW-108-01-T-S TMC2209 StepStick Samtec | StepStick_Socket_2x8_W12.70mm | U4 |
| 1 | IRF4905PBF Infineon | TO-220-3_Vertical | Q1 |
| 1 | 39-28-1023 (5566-02A) 24V IN (brick) | Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J1 |
| 1 | MSTBVA 2,5/2-G-5,08 (1755736) DPS5005 input: 1 IN+ (fused) 2 IN- | PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | J2 |
| 1 | B3P-VH(LF)(SN) +12 V to tec card | JST_VH_B3P-VH_1x03_P3.96mm_Vertical | J3 |
| 1 | B3B-XH-A(LF)(SN) 1-WIRE A (chamber + food probes) | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | B3B-XH-A(LF)(SN) 1-WIRE B (hot-sink + room probes) | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | B4P-VH(LF)(SN) MOTOR 2B 2A 1A 1B | JST_VH_B4P-VH_1x04_P3.96mm_Vertical | J8 |
| 1 | B11B-XH-A(LF)(SN) LINK to D34-CTRL | JST_XH_B11B-XH-A_1x11_P2.50mm_Vertical | J9 |
| 1 | BZX79-C15,133 BZX79-C15 | D_DO-35_SOD27_P7.62mm_Horizontal | DZ1 |
| 1 | 3568 7.5A ATM Keystone | Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | RXEF110 Littelfuse | PTC_Radial_L13.0mm_W3.2mm_P5.08mm | F2 |
| 1 | P6KE30A STMicroelectronics | D_DO-15_P12.70mm_Horizontal | D1 |
| 2 | EEU-FR1H101 100u 50V Panasonic | CP_Radial_D8.0mm_P3.50mm | C1, C8 |
| 2 | RDER71H104K0P1H03B 100n Murata | C_Rect_L4.0mm_W2.5mm_P2.50mm | C2, C9 |
| 3 | 50YXF22M5X11 22u 50V Rubycon | CP_Radial_D5.0mm_P2.00mm | C3, C4, C5 |
| 1 | MF0204FTE52-10K 10k Yageo | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | MF0204FTE52-4K7 4.7k Yageo | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
D34-pwr design files
The KiCad project lives in the aquarat/cat-feeder repository on GitHub; these links point at the commit this page was built from.
D34-pwr: common questions
How big is the D34-pwr PCB?
The D34-pwr measures 81 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the D34-pwr?
24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the D34-pwr design files?
From the aquarat/cat-feeder repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the D34-pwr design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in cat-feeder
ESP32
Feeder unrouted
aquarat
58.1 × 80 mm54 parts2LCustom license0ESP32
Feeder
aquarat
58.1 × 80 mm54 parts2LCustom license0ESP32
D34-ctrl unrouted
aquarat
81 × 47 mm45 parts2LCustom license0ESP32
D34-ctrl
aquarat
81 × 47 mm45 parts2LCustom license0D34-tec
aquarat
81 × 47 mm39 parts2LCustom license0D34-tec unrouted
aquarat
81 × 47 mm39 parts2LCustom license0D34-pwr unrouted
aquarat
81 × 47 mm24 parts2LCustom license0Fan placement
aquarat
17.7 × 16.5 mm12 parts2LCustom license0Logic placement
aquarat
14.3 × 17.7 mm10 parts2LCustom license0