26 open source boards using the 74HC166

Real designs built with the 74HC166, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the 74HC166

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the 74HC166 connects to, and the resistors, capacitors and other passives placed on it.

  • The CE pin is tied to GND on 16 of 20 designs (a signal on 4).
  • The VCC pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 1 µF).
  • The CLR pin is tied to 5V on 14 of 20 designs (a signal on 6).
  • The DS pin is tied to GND on 13 of 20 designs (5V on 4, a signal on 3).
DSpin 1Connected to: GND 65% · 5V 20% · a signal 15%
CEpin 6Connected to: GND 80% · a signal 20%
CLKpin 7Connected to: The microcontroller 20%
  • Crystal on 35% · 25.175 MHz (4), 16 MHz (3)
GNDpin 8Connected to: GND 100%
CLRpin 9Connected to: 5V 70% · a signal 30%
QHpin 13Connected to: Signal 100%
  • Series resistor on 30% · 150 Ω (3), 4.7 kΩ (1), 100 Ω (1)
VCCpin 16Connected to: 5V 95%
  • Decoupling capacitor on 65% · 100 nF (10), 1 µF (2), 10 nF (1)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, Minimal-64-Home-Computer by slu4coder, Aquarius plus by fvdhoef and DuPal DIP by DuPAL-PAL-DUmper.

The 74HC166 in open source designs

The gallery holds 26 open source boards using the 74HC166 from 21 GitHub repositories; a typical one measures about 177.8 × 100 mm and carries around 109 components.

85% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.

The most starred is Minimal-64x4-Home-Computer by slu4coder.

Microcontrollers on boards using the 74HC166

74HC166: common questions

Where can I find a 74HC166 reference design?

Each of the 26 boards on this page is a real design using the 74HC166. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC166 CE pin connected?

The CE pin is tied to GND on 16 of 20 designs (a signal on 4). Counted from the KiCad layouts of 20 open source designs using the 74HC166.

What decoupling capacitors do designs use on the 74HC166 VCC pin?

The VCC pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the 74HC166.

How is the 74HC166 CLR pin connected?

The CLR pin is tied to 5V on 14 of 20 designs (a signal on 6). Counted from the KiCad layouts of 20 open source designs using the 74HC166.

What parts are used alongside the 74HC166?

The 74HC00, 74HC245, 74HC574, 74HC138 and 74HC32 appear in the most repositories here.

Which microcontrollers do boards using the 74HC166 use?

Most are built on AVR/Arduino (7) and ESP32 (2).

How big is a typical board using the 74HC166?

The median is 177.8 × 100 mm, and 85% are two-layer designs.

What is the most popular open source board using the 74HC166?

By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.

Can I simulate one of these boards using the 74HC166 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part