8 open source boards using the MAX3221ECPWR
Real designs built with the MAX3221ECPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Aquarius plus
fvdhoef
167 × 115 mm210 parts2LMIT60ESP32
Aquarius plus
aquarius-plus
167 × 115 mm210 parts2LMIT1ESP32
Aqp moda HC
fvdhoef
141 × 89.5 mm181 parts2LMIT60ESP32
Aqp moda KBD
fvdhoef
141 × 89.5 mm181 parts2LMIT60ESP32
Aqp moda Ports
fvdhoef
141 × 89.5 mm181 parts2LMIT60ESP32
Aqp moda XBus
fvdhoef
141 × 89.5 mm181 parts2LMIT60ESP32
Aqp moda Main
fvdhoef
141 × 89.5 mm92 parts4LMIT60Aqp moda Z80
fvdhoef
84.4 × 69.8 mm21 parts4LMIT60
The MAX3221ECPWR in open source designs
The gallery holds 8 open source boards using the MAX3221ECPWR from 2 GitHub repositories; a typical one measures about 141 × 89.5 mm and carries around 181 components.
75% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Aquarius plus by fvdhoef.
Parts used alongside the MAX3221ECPWR
Microcontrollers on boards using the MAX3221ECPWR
What boards using the MAX3221ECPWR are built for
MAX3221ECPWR: common questions
Where can I find a MAX3221ECPWR reference design?
Each of the 8 boards on this page is a real design using the MAX3221ECPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MAX3221ECPWR?
The 74HC166, 74LVC4245APW, ESP32-S2-SOLO-N4R2, IS61C5128AS-25QLI and LD1117S12 appear in the most repositories here.
Which microcontrollers do boards using the MAX3221ECPWR use?
Most are built on ESP32 (7).
How big is a typical board using the MAX3221ECPWR?
The median is 141 × 89.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the MAX3221ECPWR?
By GitHub stars, Aquarius plus by fvdhoef, with 60 stars.
Can I simulate one of these boards using the MAX3221ECPWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.