4 open source boards using the LD1117S12
Real designs built with the LD1117S12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGARadioberry
pa3gsb
65 × 56 mm143 parts4LNo license675
RadioBerry
85.3 × 56 mm114 partsNo license54
FPGARadioberry
OE9SAU
65 × 56 mm143 parts4LNo license4
ESP32Aquarius plus
aquarius-plus
167 × 115 mm210 parts2LMIT1
The LD1117S12 in open source designs
The gallery holds 4 open source boards using the LD1117S12 from 4 GitHub repositories; a typical one measures about 75.2 × 56 mm and carries around 143 components.
67% use four copper layers or more, and 25% carry an open source license.
The most starred is Radioberry by pa3gsb.
Parts used alongside the LD1117S12
What boards using the LD1117S12 are built for
LD1117S12: common questions
Where can I find a LD1117S12 reference design?
Each of the 4 boards on this page is a real design using the LD1117S12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LD1117S12?
The AD9866, LD1117S25, LD1117S33 and FPGA appear in the most repositories here.
Which microcontrollers do boards using the LD1117S12 use?
Most are built on FPGA (2) and ESP32 (1).
How big is a typical board using the LD1117S12?
The median is 75.2 × 56 mm, and 33% are two-layer designs.
What is the most popular open source board using the LD1117S12?
By GitHub stars, Radioberry by pa3gsb, with 675 stars.
Can I simulate one of these boards using the LD1117S12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.