CamRover

aravindjayan·CamRover·camRover_pcb/camRover_pcb_v1_1/camRover_pcb_v1_1.kicad_pcb

CamRover PCB layout, top view — open source ESP32 board by aravindjayan

About the CamRover PCB

CamRover is an open source ESP32 PCB design by aravindjayan, published on GitHub. It is a 2-layer board measuring 88 × 60 mm, with 62 components from 28 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the OV7670, TPS562201DDCR, SRV05-4 and DRV8871DDA. By type, the board carries 19 capacitors, 19 resistors, 8 diodes, 6 ICs, 5 connectors and 2 switches.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

PCB and bringup codebase for an ESP32-S3 based wheeled robot with an OV2640 camera. Built for IIT Palakkad EE4505 course.

camRover is an ESP32-S3 rover platform with an OV7670 camera, two encoder-equipped DC motors, and addressable RGB LEDs. This repository contains the KiCad hardware design, release manufacturing files, and Arduino firmware used to bring up and test the board.

- boardbringup/ — Arduino ESP32-S3 firmware for camera streaming over Wi-Fi and testing motors, quadrature encoders, and LEDs. - camRoverpcb/camRoverpcbv11/ — KiCad v1.1 project, hierarchical schematics, PCB layout, assembly files, stencil outputs, and release Gerbers/drill files. - camroverimg.jpg — photo of the built rover.

CamRover, from the project README
From the project README

Main components on the CamRover

CamRover bill of materials (BOM)

62 components, 28 distinct parts.

QtyPartRefs
1
OV7670
U1
1
ESP32-S3-WROOM-1
U2
1
TPS562201DDCR
U3
1
SRV05-4
U4
2
DRV8871DDA
U5, U6
1
Conn_01x04
J1
1
USB_C_Receptacle_USB2.0_16P
J2
1
Conn_01x02
J3
2
Conn_01x06
J4, J5
1
Polyfuse - SMD200F/24-2920-2
F1
2
TSB008A2526A
SW1, SW2
5
WS2812B
D1, D2, D3, D4, D5
1
SMAJ13CA
D6
1
SS34_SMA
D7
1
LED
D8
1
220R@100M 0603
FB1
1
3.3uH_SWPA5020
L1
3
1u_0603_25V
C1, C4, C11
3
22u_0805_16V
C2, C8, C10
6
100n_0603_25V
C3, C5, C6, C7, C16, C17
Show 8 more
QtyPartRefs
4
10u_0805_25V
C9, C12, C14, C15
1
470uF/25V D5
C13
2
100uF/25V D5
C18, C19
2
22R_0603
R1, R2
11
10K_1%_0603
R3, R4, R5, R6, R8, R10, R11, R15 +3
3
33.2K_1%_0603
R7, R12, R13
2
4K7_0603
R9, R14
1
470R_0603
R19

CamRover design files

The KiCad project lives in the aravindjayan/CamRover repository on GitHub; these links point at the commit this page was built from.

CamRover: common questions

What microcontroller does the CamRover use?

The CamRover is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the CamRover PCB?

The CamRover measures 88 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CamRover?

62 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the CamRover design files?

From the aravindjayan/CamRover repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CamRover design in my own project?

The repository has no license, so all rights stay with aravindjayan. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CamRover without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards