14 open source boards using the 74LVC1G02

Real designs built with the 74LVC1G02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the 74LVC1G02

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74LVC1G02 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF).
Pin 1Connected to: A connector 50%, the microcontroller 20%
  • Capacitor to GND on 30% · 100 nF (3), 1 µF (1)
GNDpin 3Connected to: GND 100%
VCCpin 5Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 70% · 100 nF (7), 1 µF (1), 10 µF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mega IIe by baldengineer, Vape light by sbyd-space, Co2-Sensor-Hardware by twam and FOXSI-4 Formatter/Plenum board by foxsi.

The 74LVC1G02 in open source designs

The gallery holds 14 open source boards using the 74LVC1G02 from 10 GitHub repositories; a typical one measures about 98.6 × 68 mm and carries around 85 components.

57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is Mega IIe by baldengineer.

Parts used alongside the 74LVC1G02

Microcontrollers on boards using the 74LVC1G02

74LVC1G02: common questions

Where can I find a 74LVC1G02 reference design?

Each of the 14 boards on this page is a real design using the 74LVC1G02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G02 VCC pin?

The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the 74LVC1G02.

What parts are used alongside the 74LVC1G02?

The 74HC595, 74LVC2G74 and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G02 use?

Most are built on STM32 (5), ESP32 (3), RP2040/RP2350 (2) and PIC (1).

How big is a typical board using the 74LVC1G02?

The median is 98.6 × 68 mm, and 57% are two-layer designs.

What is the most popular open source board using the 74LVC1G02?

By GitHub stars, Mega IIe by baldengineer, with 33 stars.

Can I simulate one of these boards using the 74LVC1G02 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part