Low-Power-Env-Datalogger

ArnavNevgi·Low-Power-Env-Datalogger·hardware/datalogger.kicad_pcb

Low-Power-Env-Datalogger PCB layout, top view — open source AVR/Arduino board by ArnavNevgi

About the Low-Power-Env-Datalogger PCB

Low-Power-Env-Datalogger is an open source AVR/Arduino PCB design by ArnavNevgi, published on GitHub. It is a 2-layer board measuring 75 × 50 mm, with 62 components from 33 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the 24LC1025T-I/SN, MCP7940N-I/SN, SHT40-AD1B-R2, CH340C and USBLC6-2SC6. By type, the board carries 21 capacitors, 15 resistors, 11 ICs, 7 connectors, 3 diodes and 2 crystals.

It belongs with the sensors and power & battery designs in this gallery.

From the project

Battery-powered ATmega328P environmental datalogger: 512 KB EEPROM, RTC wake from sleep, SHT40, USB-C. KiCad 10 + PlatformIO.

A battery-powered environmental data logger: ATmega328P, 512 KB of I²C EEPROM, a battery-backed RTC that wakes the MCU from deep sleep, an onboard SHT40 temperature/humidity sensor, and USB-C for data download. It is a ground-up redesign of an earlier open design: Rev A was audited from its fabrication files, and Rev B fixes its six blocking defects.

Highlights - Audit first: Rev A's netlist was rebuilt from the Gerber X2 attributes, which exposed 6 blocking defects that its ERC/DRC had passed. - Low-power by design: 3.3 V / 8 MHz (in spec across the whole battery range), a 1.6 µA LDO, and…

Low-Power-Env-Datalogger, from the project README
From the project README

Main components on the Low-Power-Env-Datalogger

Low-Power-Env-Datalogger bill of materials (BOM)

62 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328P-AU
ATmega328P-AU
Microchip
U1
4
24LC1025T-I/SN
24LC1025-I/SN
Microchip
U2, U3, U4, U5
1
MCP7940N-I/SN
Microchip
U6
1
SHT40-AD1B-R2
SHT40-AD1B
Sensirion
U7
1
CH340C
WCH
U8
1
USBLC6-2SC6
STMicroelectronics
U9
2
MCP1700T-3302E/TT
Microchip
U10, U11
1
DMG2305UX-7
DMG2305UX
Diodes Inc
Q1
1
X32258MSB4SI
8MHz
YXC
Y1
1
Q13FC13500002
32.768kHz
Epson (FC-135)
Y2
1
TYPE-C-31-M-12
USB_C_Receptacle
HRO
J1
1
B2B-PH-K-S(LF)(SN)
BATTERY
JST
J2
1
B-2100S02P-A110
IBAT_MEAS
Ckmtw
J3
1
2.54-2*3P
ICSP
BOOMELE
J4
1
PZ254V-11-07P
DIGITAL
XFCN
J5
1
PZ254V-11-07P
ANALOG
XFCN
J6
1
SM04B-SRSS-TB(LF)(SN)
Qwiic
JST
J7
1
3000
CR1220
Keystone
BT1
1
TS-1187A-B-A-B
RESET
XKB
SW1
1
KT-0603R
RED
KENTO
D1
Show 13 more
QtyPartRefs
1
BAT54WS
JSCJ
D2
1
KT-0603G
GREEN
KENTO
D3
3
CL10A105KB8NNNC
1uF
Samsung
C1, C2, C5
13
CC0603KRX7R9BB104
100nF
Yageo
C3, C4, C7, C10, C11, C12, C13, C14 +5
1
CL21A106KAYNNNE
10uF
Samsung
C6
2
CL10C330JB8NNNC
33pF
Samsung
C8, C9
2
CL10C100JB8NNNC
10pF
Samsung
C18, C19
2
0603WAF5101T5E
5.1k
UNI-ROYAL
R1, R2
4
0603WAF1001T5E
1k
UNI-ROYAL
R3, R4, R5, R11
2
0603WAF1004T5E
1M
UNI-ROYAL
R6, R7
2
0603WAF1003T5E
100k
UNI-ROYAL
R8, R9
3
0603WAF1002T5E
10k
UNI-ROYAL
R10, R14, R15
2
0603WAF4701T5E
4.7k
UNI-ROYAL
R12, R13

Low-Power-Env-Datalogger design files

The KiCad project lives in the ArnavNevgi/Low-Power-Env-Datalogger repository on GitHub; these links point at the commit this page was built from.

Low-Power-Env-Datalogger: common questions

What microcontroller does the Low-Power-Env-Datalogger use?

The Low-Power-Env-Datalogger is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the Low-Power-Env-Datalogger PCB?

The Low-Power-Env-Datalogger measures 75 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Low-Power-Env-Datalogger?

62 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Low-Power-Env-Datalogger design files?

From the ArnavNevgi/Low-Power-Env-Datalogger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Low-Power-Env-Datalogger design in my own project?

The repository has no license, so all rights stay with ArnavNevgi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Low-Power-Env-Datalogger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards