ESPFC-WHOOP-
Athul24milu·ESPFC-WHOOP-·04_KiCad_Project/ESP_FPV_ATHUL_IOGROUPED.kicad_pcb
About the ESPFC-WHOOP- PCB
ESPFC-WHOOP- is an open source ESP32 PCB design by Athul24milu, published on GitHub. It is a 4-layer board measuring 40 × 40 mm, with 71 components from 48 distinct parts.
Its main chip is the XIAO ESP32-S3 direct SMD, from the ESP32 family. Other key parts include the AT7456E, MPU-6050, TPS61023DRLR and SN74LVC1G17DBVR. By type, the board carries 22 capacitors, 21 resistors, 6 diodes, 5 ICs, 4 transistors and 4 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
ESP BASED FC FOR WHOOP DRONES 40* 40
ESP FPV / ATHUL - MATRIX40 L4 hardware for a 1S brushed FPV flight-controller project, built around the Seeed XIAO ESP32-S3, MPU-6050 and AT7456E analog OSD.
- User manual: connections, configuration, installation and troubleshooting. - Assembly and component guide: component values, closeups, pin 1, polarity and hidden XIAO contacts. - Purchase BOM: quantities and Robu, Quartz Components and Evelta links. Search-only links and unconfirmed candidates are marked. - All-reference BOM CSV: all 75 board references, including 62 fitted component packages and integral PCB features. - Package…

Main components on the ESPFC-WHOOP-
ESPFC-WHOOP- bill of materials (BOM)
71 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO ESP32-S3 direct SMD | XIAO_ESP32S3_Direct_SMD_UART | U1 |
| 1 | AT7456E | HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.75x6.2mm_Compact | U2 |
| 1 | MPU-6050 | RevK_Assembly_U3 | U3 |
| 1 | TPS61023DRLR | SOT-563_Compact_Assembly | U4 |
| 1 | SN74LVC1G17DBVR | Receiver_Buffer_SOT23_5 | U5 |
| 1 | AO3400A | RevK_Assembly_Q1 | Q1 |
| 1 | AO3400A | SOT-23_Compact | Q2 |
| 1 | AO3400A | SOT-23_Compact_Assembly | Q3 |
| 1 | AO3400A | RevK_Assembly_Q4 | Q4 |
| 1 | YSX321SL 27MHz 12pF | RevK_Assembly_Y1 | Y1 |
| 1 | 1S BATTERY | Battery_Pads_2p6 | J1 |
| 1 | CAMERA | Camera_Pads_1p65 | J2 |
| 1 | AIR VTX | VTX_Pads_1p65 | J3 |
| 1 | iBUS / ELRS CRSF receiver | Receiver_Pads_1p5 | J4 |
| 1 | MOTOR 1 | RevK_Assembly_JM1 | JM1 |
| 1 | MOTOR 2 | RevK_Assembly_JM2 | JM2 |
| 1 | MOTOR 3 | RevK_Assembly_JM3 | JM3 |
| 1 | MOTOR 4 | RevK_Assembly_JM4 | JM4 |
| 1 | CLOSED in flight / OPEN for USB + battery | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm_Compact | JP1 |
| 1 | PMEG3020ER | Nexperia_CFP3_SOD-123W_Compact | D1 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PMEG3020ER | RevK_Assembly_D2 | D2 |
| 1 | PMEG3020ER | Nexperia_CFP3_SOD-123W_Compact_Assembly | D3 |
| 1 | PMEG3020ER | Nexperia_CFP3_SOD-123W_CurvedEdge | D4 |
| 1 | PMEG3020ER | RevK_Assembly_D5 | D5 |
| 1 | BLUE 0805 | LED_0805_2012Metric_Compact_Assembly | D6 |
| 2 | BLM21PG601SN1D 600R | L_0805_2012Metric_Compact | FB1, FB2 |
| 1 | 1uH XEL4030-102MEC | L_Coilcraft_XxL4030_Compact | L1 |
| 9 | 100NF 100nF | C_0805_2012Metric_Compact | C1, C2, C3, C4, C5, C9, C10, C11 +1 |
| 2 | 47uF 10V X5R | C_1206_3216Metric_Compact | C6, C7 |
| 2 | 10uF 10V X5R | C_0805_2012Metric_Compact | C8, C14 |
| 1 | 100nF X7R 10V | C_0805_2012Metric_Compact | C12 |
| 1 | 10NF 10nF | C_0805_2012Metric_Compact | C13 |
| 3 | 22uF 10V X5R | C_0805_2012Metric_Compact | C15, C16, C18 |
| 1 | 220pF C0G | C_0805_2012Metric_Compact | C17 |
| 1 | 2.2nF X7R 50V | RevK_Assembly_C20 | C20 |
| 2 | 18pF C0G 50V | C_0805_2012Metric_Compact | C21, C22 |
| 4 | 100R | R_0805_2012Metric_Compact | R1, R2, R3, R4 |
| 3 | 100K 100k | R_0805_2012Metric_Compact | R5, R7, R20 |
| 2 | 100K 100k | R_0805_2012Metric_Compact_Assembly | R6, R8 |
| 2 | 100k 1% | R_0805_2012Metric_Compact | R9, R18 |
| 1 | 47k 1% | R_0805_2012Metric_Compact | R10 |
| 1 | 1k | R_0805_2012Metric_Compact | R11 |
| 2 | 10K 10k | R_0805_2012Metric_Compact | R12, R14 |
| 1 | 4.7K 4.7k | R_0805_2012Metric_Compact | R13 |
| 2 | 75R 1% | R_0805_2012Metric_Compact | R15, R16 |
| 1 | 732k 1% | R_0805_2012Metric_Compact | R17 |
| 1 | 470R | R_0805_2012Metric_Compact | R19 |
| 1 | 4.7k 1% | R_0805_2012Metric_Compact | R21 |
ESPFC-WHOOP- design files
The KiCad project lives in the Athul24milu/ESPFC-WHOOP- repository on GitHub; these links point at the commit this page was built from.
ESPFC-WHOOP-: common questions
What microcontroller does the ESPFC-WHOOP- use?
The ESPFC-WHOOP- is built around the XIAO ESP32-S3 direct SMD, from the ESP32 family.
How big is the ESPFC-WHOOP- PCB?
The ESPFC-WHOOP- measures 40 × 40 mm, has 4 copper layers and is 1 mm thick.
How many components are on the ESPFC-WHOOP-?
71 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESPFC-WHOOP- design files?
From the Athul24milu/ESPFC-WHOOP- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESPFC-WHOOP- design in my own project?
The repository has no license, so all rights stay with Athul24milu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESPFC-WHOOP- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k