31 open source boards using the AT7456E
Real designs built with the AT7456E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
STM32F7 FC
rishikesh2715
38.5 × 38.5 mm127 parts8LMIT56STM32
NewSkyH7-Air
kuku-199
36 × 36 mm157 parts6LApache-2.010STM32
Cobalt f405
msaribekyan
38.5 × 38.5 mm68 parts2LGPL-3.06STM32
Dragonfly
Broccoliux
66 × 58.8 mm226 parts4LMIT2STM32
Fpv drone
AQUA-Warrior
37 × 37 mm106 parts4LCC-BY-SA-4.02STM32
Mini-Air
darshg321
41 × 42 mm84 parts2LCERN-OHL-W-2.02ESP32
OpenSourceDrone
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0ESP32
Emb drone flight stack
CGainsWorks
497.4 × 154.7 mm1182 parts6LNo license0STM32
Little drone-
Mariavrgs
66 × 58.8 mm226 parts4LMIT0RP2040/RP2350
Drone
WiktorKociuba
60.4 × 98.3 mm201 parts6LNo license0STM32
ZenFly F71
LongDo1902
41.5 × 41.5 mm171 parts4LNo license0STM32
Vayu-F722
ishantmahatopro
42 × 42 mm137 parts4LMIT0STM32
MagnumFC
poojithas956
43.6 × 43 mm129 parts6LMIT0STM32
Zero star
Auodit
38 × 38 mm127 parts4LCC-BY-SA-4.00STM32
Quadcopter-Flight-Controller
Ari-Hetti
51.3 × 55.3 mm119 parts2LMIT0STM32
Flight-Controller-V2
desanv01
40.6 × 50.5 mm115 parts6LCERN-OHL-S-2.00STM32
SPAR
HazzerTheGreat
48 × 58 mm104 parts6LNo license0STM32
Stm32-flight controller
bassammorsy
108 × 74 mm100 parts4LMIT0STM32
EuroFly
GigelBosket
38.6 × 38.6 mm99 parts4LCERN-OHL-P-2.00STM32
M-FC
Def12345678
38.5 × 42 mm88 parts4LMIT0STM32
Dreamscape-F405-2020
sneakylizard123-4
32 × 35 mm83 parts6LNo license0ESP32
ESPFC-WHOOP-
Athul24milu
40 × 40 mm71 parts4LNo license0STM32
Falcon-F4-Flight controller
AT882
39.5 × 40 mm63 parts4LNo license0- schematic only · 148 partsSTM32
F722-2020-fc
ABHISHEK22415
148 partsNo license0 ESP32
VENDETTAFC
Caped-Crussader
43.6 × 43 mm129 parts6LCERN-OHL-S-2.028STM32
NewSkyF7-Air
kuku-199
36 × 36 mm145 parts4LApache-2.010STM32
Flight Controller
LongDo1902
38.5 × 38.5 mm127 parts8LNo license0STM32
Zero star rounded
Auodit
38 × 38 mm110 parts4LCC-BY-SA-4.00Hardware
vili111111p
39 × 39 mm104 parts4LNo license0M-PDB
Def12345678
38.5 × 42 mm21 parts4LMIT0ESP8266
Single radio
LongDo1902
37.7 × 37.7 mm43 parts4LNo license0
How designs wire the AT7456E
Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the AT7456E connects to, and the resistors, capacitors and other passives placed on it.
- The CLKIN_5 pin has a crystal on 24 of 25 designs, most often 27 MHz.
- The VOUT_26 pin has a series capacitor on 24 of 25 designs, most often 22 µF (then 47 µF).
- The XFB_6 pin has a crystal on 23 of 25 designs, most often 27 MHz.
- The SAG_25 pin has a series capacitor on 23 of 25 designs, most often 22 µF (then 47 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NC_1pin 1 | Connected to: Not connected 100% | — |
| NC_2pin 2 | Connected to: Not connected 100% | — |
| DVDD_3pin 3 | Connected to: 5V 92% |
|
| DGND_4pin 4 | Connected to: GND 100% | — |
| CLKIN_5pin 5 | Connected to: Signal 100% |
|
| XFB_6pin 6 | Connected to: Signal 96% |
|
| CLKOUT_7pin 7 | Connected to: Not connected 92% | — |
| LOS_12pin 12 | Connected to: Not connected 80% · a signal 20% | — |
| SYNC_IN_13pin 13 | Connected to: Not connected 92% | — |
| NC_14pin 14 | Connected to: Not connected 100% | — |
| NC_15pin 15 | Connected to: Not connected 100% | — |
| NC_16pin 16 | Connected to: Not connected 100% | — |
| VSYNC_17pin 17 | Connected to: Not connected 80% · a signal 20% | — |
| HSYNC_18pin 18 | Connected to: Not connected 80% · a signal 20% | — |
| RESET_19pin 19 | Connected to: Signal 52% · 5V 48% |
|
| AGND_20pin 20 | Connected to: GND 96% | — |
| AVDD_21pin 21 | Connected to: 5V 92% |
|
| VIN_22pin 22 | Connected to: Signal 92% |
|
| PGND_23pin 23 | Connected to: GND 96% | — |
| PVDD_24pin 24 | Connected to: 5V 92% |
|
| SAG_25pin 25 | Connected to: Signal 96% |
|
| VOUT_26pin 26 | Connected to: Signal 100% |
|
| NC_27pin 27 | Connected to: Not connected 100% | — |
| NC_28pin 28 | Connected to: Not connected 100% | — |
| EPpin 29 | Connected to: GND 87% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32F7 FC by rishikesh2715, VENDETTAFC by Caped-Crussader, NewSkyF7-Air by kuku-199 and Cobalt f405 by msaribekyan.
The AT7456E in open source designs
The gallery holds 31 open source boards using the AT7456E from 26 GitHub repositories; a typical one measures about 39.8 × 41.7 mm and carries around 119 components.
90% use four copper layers or more, and 61% carry an open source license.
The most starred is STM32F7 FC by rishikesh2715.
Parts used alongside the AT7456E
Microcontrollers on boards using the AT7456E
What boards using the AT7456E are built for
AT7456E: common questions
Where can I find a AT7456E reference design?
Each of the 31 boards on this page is a real design using the AT7456E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AT7456E CLKIN_5 pin connected?
The CLKIN_5 pin has a crystal on 24 of 25 designs, most often 27 MHz. Counted from the KiCad layouts of 25 open source designs using the AT7456E.
How is the AT7456E VOUT_26 pin connected?
The VOUT_26 pin has a series capacitor on 24 of 25 designs, most often 22 µF (then 47 µF). Counted from the KiCad layouts of 25 open source designs using the AT7456E.
How is the AT7456E XFB_6 pin connected?
The XFB_6 pin has a crystal on 23 of 25 designs, most often 27 MHz. Counted from the KiCad layouts of 25 open source designs using the AT7456E.
What parts are used alongside the AT7456E?
The ICM-42688-P, BMP388, USBLC6-2SC6, BMP280 and STM32F405RGTx appear in the most repositories here.
Which microcontrollers do boards using the AT7456E use?
Most are built on STM32 (23), ESP32 (4), ESP8266 (1) and RP2040/RP2350 (1).
How big is a typical board using the AT7456E?
The median is 39.8 × 41.7 mm, and 10% are two-layer designs.
What is the most popular open source board using the AT7456E?
By GitHub stars, STM32F7 FC by rishikesh2715, with 56 stars.
Can I simulate one of these boards using the AT7456E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.