Wifi geiger counter
atomicra1n·wifi-geiger-counter
About the Wifi geiger counter PCB
Wifi geiger counter is an open source ESP32 PCB design by atomicra1n, published on GitHub. It is a 2-layer board measuring 95 × 55 mm, with 64 components from 32 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the TP4056-42-ESOP8, AP2112K-3.3TRG1 and USBLC6-2SC6. By type, the board carries 30 resistors, 11 capacitors, 9 diodes, 4 ICs, 3 transistors and 3 connectors.
It belongs with the iot & wireless and science & space designs in this gallery.
Main components on the Wifi geiger counter
Wifi geiger counter bill of materials (BOM)
64 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 TP4056 TOPPOWER(南京拓微) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U1 |
| 1 | ESP32-C3-MINI-1-N4 ESPRESSIF(乐鑫) | WIFIM-SMD_ESP32-C3-MINI-1 | U2 |
| 1 | AP2112K-3.3TRG1 DIODES(美台) | SOT-25-5_L2.9-W1.6-P0.95-LS2.8-BL | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | MMBTA42(RANGE:100-200) MMBTA42_C8515 CJ(江苏长电/长晶) | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1 |
| 2 | MMBT3904 | SOT-23 | Q2, Q3 |
| 1 | TYPE-C-31-M-12 韩国韩荣 | USB-C_SMD-TYPE-C-31-M-12_1 | J1 |
| 1 | S2B-PH-K-S-GW JST | CONN-TH_S2B-PH-K-S-GW | J2 |
| 1 | SBM-20 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | MLT-8530 | Buzzer_Murata_PKMCS0909E | BZ1 |
| 1 | RESET | SW_SPST_CK_KMS2xxGP | SW1 |
| 1 | BOOT | SW_SPST_CK_KMS2xxGP | SW2 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 1 | GREEN | LED_0805_2012Metric | D2 |
| 3 | US1M US1M_C83962 星海 | SMA_L4.3-W2.6-LS5.2-RD | D3, D4, D5 |
| 1 | 1N4148W | D_SOD-123 | D6 |
| 1 | SMF5.0A | D_SOD-123F | D7 |
| 1 | 3.3V | D_SOD-323 | D8 |
| 1 | LED | LED_0805_2012Metric | D9 |
| 1 | FNR6045S103KT cjiang(长江微电) | IND-SMD_L6.0-W6.0_FNR60XXS | L1 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10u | C_0805_2012Metric | C1, C2, C3, C5 |
| 2 | 1u | C_0805_2012Metric | C4, C7 |
| 2 | 100n | C_0805_2012Metric | C6, C11 |
| 3 | CC1206KKX7RCBB103 YAGEO(国巨) | C1206 | C8, C9, C10 |
| 2 | 5.1k | R_0805_2012Metric | R1, R2 |
| 1 | 2k | R_0805_2012Metric | R3 |
| 6 | 1k | R_0805_2012Metric | R4, R5, R10, R27, R29, R30 |
| 8 | 10k | R_0805_2012Metric | R6, R7, R8, R9, R11, R25, R26, R28 |
| 1 | 220k | R_0805_2012Metric | R12 |
| 10 | 10M | R_1206_3216Metric | R13, R14, R15, R16, R17, R18, R19, R20 +2 |
| 1 | 4.7M | R_1206_3216Metric | R23 |
| 1 | 100k | R_0805_2012Metric | R24 |
Wifi geiger counter design files
The KiCad project lives in the atomicra1n/wifi-geiger-counter repository on GitHub; these links point at the commit this page was built from.
- Layoutwifi-geiger-counter.kicad_pcb
- Schematicwifi-geiger-counter.kicad_sch
Wifi geiger counter: common questions
What microcontroller does the Wifi geiger counter use?
The Wifi geiger counter is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the Wifi geiger counter PCB?
The Wifi geiger counter measures 95 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wifi geiger counter?
64 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wifi geiger counter design files?
From the atomicra1n/wifi-geiger-counter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wifi geiger counter design in my own project?
The repository has no license, so all rights stay with atomicra1n. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Wifi geiger counter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k