Beetle
Autohome2·dxControl_beetle·Dev/kicad/first board/beetle.kicad_pcb
About the Beetle PCB
Beetle is an open source Microchip SAM PCB design by Autohome2, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 44.5 × 19.5 mm, with 29 components from 22 distinct parts.
Its main chip is the ATSAMD21E18A-MU, from the Microchip SAM family. Other key parts include the MF-REG-SOT235-3.3V-300mA, MCP2515-EST and MCP2562-E-SN. By type, the board carries 9 capacitors, 5 connectors, 4 ICs, 4 resistors, 2 crystals and 2 diodes.
It belongs with the displays & leds designs in this gallery.
From the project
Speeduino Canbus Beetle
As they have no onboard Canbus interface this plugin "Beetle" offers the expansion.
- It has a MCP2515 Can interface chip and the External Can connections have esd protection.
- There is space for a SPI EEPROM which can be enabled in the firmware rather than using the emulated eeprom.
- There is a header for a SPI OLED display (128x32 or 128x64 currently) for simple display of realtime data.
Main components on the Beetle
Beetle bill of materials (BOM)
29 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MF-REG-SOT235-3.3V-300mA | SOT23-5 | IC1 |
| 1 | ATSAMD21E18A-MU | QFN32-5X5-LESSTHERMAL | U1 |
| 1 | MCP2515-EST | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U2 |
| 1 | MCP2562-E-SN | SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | ABS07-32.768KHZ | CRYSTAL-SMD-3.2X1.5 | Y1 |
| 1 | 16MHZ | Crystal_Round_d3.0mm_Vertical | Y2 |
| 1 | spi disp | Pin_Header_Straight_1x07_Pitch2.54mm | J1 |
| 1 | GS2 | GS2 | J2 |
| 1 | ECU | Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | CAN | Pin_Header_Straight_1x02_Pitch2.54mm | J4 |
| 1 | Aux io | Pin_Header_Straight_1x08_Pitch2.54mm | J5 |
| 1 | CONNETTORI_0171_PH127-205DF055G00A | CONNETTORI_PINHEAD-2X5-P127 | JP3 |
| 1 | MF-SW-TACT-4.2MM | PTS810 | SW1 |
| 1 | MF-CON-MICROUSB-RIGHT | FCI_USB_MICRO_B | USB1 |
| 1 | status_LED | LED_0805 | D1 |
| 1 | pwr_LED | LED_0805 | D2 |
| 2 | 100nF | C_0805 | C1, C2 |
| 2 | 22pF | C_0805 | C3, C4 |
| 3 | 1uF | C_0805 | C5, C6, C7 |
| 2 | 18pf | C_0805 | C8, C9 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 330 | R_0805 | R3, R4, R5 |
| 1 | 120R | R_0805 | R6 |
Beetle design files
The KiCad project lives in the Autohome2/dxControl_beetle repository on GitHub; these links point at the commit this page was built from.
Beetle: common questions
What microcontroller does the Beetle use?
The Beetle is built around the ATSAMD21E18A-MU, from the Microchip SAM family.
How big is the Beetle PCB?
The Beetle measures 44.5 × 19.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Beetle?
29 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Beetle design files?
From the Autohome2/dxControl_beetle repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Beetle design in my own project?
Yes, under the terms of its GPL-2.0 license, which Autohome2 chose for the repository.
Can I test firmware for the Beetle without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in dxControl_beetle
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416