Beetle v1.001 bothfill

Autohome2·dxControl_beetle·Dev/kicad/first board/beetle_v1.001_bothfill.kicad_pcb

Beetle v1.001 bothfill PCB layout, top view — open source Microchip SAM board by Autohome2

About the Beetle v1.001 bothfill PCB

Beetle v1.001 bothfill is an open source Microchip SAM PCB design by Autohome2, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 48 × 26 mm, with 37 components from 26 distinct parts.

Its main chip is the ATSAMD21E18A-MU, from the Microchip SAM family. Other key parts include the MCP2515-EST, MCP2562-E-SN, LM1117-3.3 and AT25128 SPI EEPROM. By type, the board carries 9 capacitors, 8 resistors, 6 connectors, 5 ICs, 3 diodes and 2 transistors.

It belongs with the displays & leds designs in this gallery.

From the project

Speeduino Canbus Beetle

As they have no onboard Canbus interface this plugin "Beetle" offers the expansion.

- It has a MCP2515 Can interface chip and the External Can connections have esd protection.

- There is space for a SPI EEPROM which can be enabled in the firmware rather than using the emulated eeprom.

- There is a header for a SPI OLED display (128x32 or 128x64 currently) for simple display of realtime data.

Main components on the Beetle v1.001 bothfill

Beetle v1.001 bothfill bill of materials (BOM)

37 components, 26 distinct parts.

QtyPartRefs
1
ATSAMD21E18A-MU
U1
1
MCP2515-EST
U2
1
MCP2562-E-SN
U3
1
LM1117-3.3
U4
1
AT25128 SPI EEPROM
U5
2
2N7002
Q1, Q2
1
ABS07-32.768KHZ
Y1
1
16MHZ
Y2
1
spi disp
J1
1
GS2
J2
1
ECU
J3
1
CAN
J4
1
Aux io
J5
1
USB_B_Micro
J6
1
CONNETTORI_0171_PH127-205DF055G00A
JP3
1
SW_Push
SW1
1
status_LED
D1
1
pwr_LED
D2
1
esdcan01
D3
2
100nF
C1, C2
Show 6 more
QtyPartRefs
2
22pF
C3, C4
3
1uF
C5, C6, C7
2
18pf
C8, C9
4
10k
R1, R2, R7, R8
3
330
R3, R4, R5
1
120R
R6

Beetle v1.001 bothfill design files

The KiCad project lives in the Autohome2/dxControl_beetle repository on GitHub; these links point at the commit this page was built from.

Beetle v1.001 bothfill: common questions

What microcontroller does the Beetle v1.001 bothfill use?

The Beetle v1.001 bothfill is built around the ATSAMD21E18A-MU, from the Microchip SAM family.

How big is the Beetle v1.001 bothfill PCB?

The Beetle v1.001 bothfill measures 48 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Beetle v1.001 bothfill?

37 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Beetle v1.001 bothfill design files?

From the Autohome2/dxControl_beetle repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Beetle v1.001 bothfill design in my own project?

Yes, under the terms of its GPL-2.0 license, which Autohome2 chose for the repository.

Can I test firmware for the Beetle v1.001 bothfill without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in dxControl_beetle

Similar boards