PACC
AwesomeSno·PACC·hardware/pacc.kicad_pcb
About the PACC PCB
PACC is an open source ESP32 PCB design by AwesomeSno, published on GitHub. It is a 2-layer board measuring 60 × 40 mm, with 34 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the BNO085, MCP73831T-2ACI/OT and TLV75533PDBVR. By type, the board carries 13 resistors, 8 capacitors, 4 ICs, 2 connectors, 2 switches and 2 diodes.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Palma Advanced Cursor Control (PACC)
PACC is a glove based controller inspired by sci-fi movies that lets you control any device using your palm without ever touching a mouse. The idea is to have something similar to how you control things on an Apple Vision Pro, but for any regular computer or device.
The glove uses an onboard IMU and flex sensors to track your hand orientation and finger movements, which an ESP32 translates into standard HID mouse commands sent over Bluetooth or USB-C.

Main components on the PACC
PACC bill of materials (BOM)
34 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 LCSC | ESP32-S3-WROOM-1 | U1 |
| 1 | BNO085 Robocraze | LGA-28_5.2x3.8mm_P0.5mm | U2 |
| 1 | MCP73831T-2ACI/OT MCP73831 LCSC | SOT-23-5 | U3 |
| 1 | TLV75533PDBVR TLV75533P LCSC | SOT-23-5 | U4 |
| 1 | COIN Robu.in | Motor_Coin | M1 |
| 1 | MMBT2222A 2N2222 LCSC | SOT-23 | Q1 |
| 1 | USB-C LCSC | USB_C_Receptacle | J1 |
| 1 | DEBUG LCSC | Connector_PinHeader_1x04 | J2 |
| 1 | 3.7V 500mAh Robu.in | BatteryHolder | BT1 |
| 1 | BOOT LCSC | SW_Tactile | SW1 |
| 1 | RESET LCSC | SW_Tactile | SW2 |
| 1 | 1N4148W 1N4148 LCSC | D_SOD-123 | D1 |
| 1 | RED LCSC | LED_0603_1608Metric | D2 |
| 3 | 1u LCSC | C_0603_1608Metric | C1, C7, C8 |
| 1 | 10u LCSC | C_0603_1608Metric | C2 |
| 2 | 100n LCSC | C_0603_1608Metric | C3, C4 |
| 2 | 4.7u LCSC | C_0603_1608Metric | C5, C6 |
| 6 | 10k LCSC | R_0603_1608Metric | R1, R2, R5, R6, R7, R8 |
| 2 | 4.7k LCSC | R_0603_1608Metric | R3, R4 |
| 1 | 3.9k LCSC | R_0603_1608Metric | R9 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1k LCSC | R_0603_1608Metric | R10, R13 |
| 2 | 5.1k LCSC | R_0603_1608Metric | R11, R12 |
PACC design files
The KiCad project lives in the AwesomeSno/PACC repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/pacc.kicad_pcb
- Schematichardware/pacc.kicad_sch
- BOMhardware/bom.csv
PACC: common questions
What microcontroller does the PACC use?
The PACC is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the PACC PCB?
The PACC measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PACC?
34 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PACC design files?
From the AwesomeSno/PACC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PACC design in my own project?
The repository has no license, so all rights stay with AwesomeSno. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PACC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k