Pride Badge
aziraphale·pride-badge-v1
About the Pride Badge PCB
Pride Badge is an open source STM32 PCB design by aziraphale, published on GitHub. It is a 2-layer board measuring 65.2 × 72.2 mm, with 128 components from 102 distinct parts.
Its main chip is the STM32F042F6P6, from the STM32 family. Other key parts include the USBLC6-2SC6, TP4056, MT3608, AZ1117EH-3.3 and FS312F. By type, the board carries 30 test points, 29 resistors, 18 capacitors, 10 ICs, 9 diodes and 7 switches.
It belongs with the wearables designs in this gallery.
From the project
🌈⚡Pride badge PCB with LEDs, STM32, and 3D printed diffuser+case!
Main components on the Pride Badge
Pride Badge bill of materials (BOM)
128 components, 102 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT23-6L | U1 |
| 1 | TP4056 | SOIC-8-1EP_W3.9mm | U2 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | AZ1117EH-3.3 | SOT-223 | U4 |
| 1 | FS312F | SOT-23-6 | U5 |
| 1 | FS8205 | SOT-23-6 | U6 |
| 1 | STM32F042F6P6 | TSSOP-20_W4.4mm | U7 |
| 1 | IS31FL3218 | SOIC-24_W7.50mm | U8 |
| 1 | LM339 | SOIC-14_W3.9mm | U9 |
| 1 | 555 | SOIC-8_W3.9mm | U10 |
| 1 | USB_B_Micro | USB_Micro-B_OSHPark | J1 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J2 |
| 1 | Custom_SWD | bb02-hy05a | J3 |
| 1 | LED_1x1 | D_0805 | DA1 |
| 1 | LED_1x2 | D_0805 | DA2 |
| 1 | LED_1x3 | D_0805 | DA3 |
| 1 | LED_2x1 | D_0805 | DB1 |
| 1 | LED_2x2 | D_0805 | DB2 |
| 1 | LED_2x3 | D_0805 | DB3 |
| 1 | LED_3x1 | D_0805 | DC1 |
Show 82 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_3x2 | D_0805 | DC2 |
| 1 | LED_3x3 | D_0805 | DC3 |
| 1 | LED_4x1 | D_0805 | DD1 |
| 1 | LED_4x2 | D_0805 | DD2 |
| 1 | LED_4x3 | D_0805 | DD3 |
| 1 | LED_5x1 | D_0805 | DE1 |
| 1 | LED_5x2 | D_0805 | DE2 |
| 1 | LED_5x3 | D_0805 | DE3 |
| 1 | LED_6x1 | D_0805 | DF1 |
| 1 | LED_6x2 | D_0805 | DF2 |
| 1 | LED_6x3 | D_0805 | DF3 |
| 1 | 500mA/8V | Fuse_SMD1206_Reflow | F1 |
| 1 | pride_badge_outline_100x73 | pride_badge_outline_100x73 | Outline_Eco2 |
| 1 | SW_DPDT_x2 | Switch_Slide_JS202011SCQN | SW1 |
| 1 | Mode_BTN | Btn_SMD_6x3.5mm | SW2 |
| 1 | Bright_BTN | Btn_SMD_6x3.5mm | SW3 |
| 1 | Reset_BTN | Tiny_SMD_Side_Btn_4x2.5mm | SW4 |
| 1 | Boot_BTN | Tiny_SMD_Side_Btn_4x2.5mm | SW5 |
| 1 | SW_SeeBattGauge | Btn_SMD_6x3.5mm | SW6 |
| 1 | SW_DPDT_x2 | SW_SPDT_PCM12 | SW7 |
| 1 | TP_USBDM | Test_Point_1mm | TP1 |
| 1 | TP_VUSB | Test_Point_1mm | TP2 |
| 1 | TP_5V | Test_Point_1mm | TP3 |
| 2 | TP_3V3 | Test_Point_1mm | TP4, TP29 |
| 3 | TP_GND | Test_Point_1mm | TP5, TP27, TP28 |
| 1 | TP_BATT+ | Test_Point_1mm | TP6 |
| 1 | TP_BATT- | Test_Point_1mm | TP7 |
| 1 | TP_USBDP | Test_Point_1mm | TP8 |
| 1 | TP_CHRGVCC | Test_Point_1mm | TP9 |
| 1 | TP_339+_BLUE | Test_Point_1mm | TP10 |
| 1 | TP_339+_GREEN | Test_Point_1mm | TP11 |
| 1 | TP_339+_YELLOW | Test_Point_1mm | TP12 |
| 1 | TP_555THRES | Test_Point_1mm | TP13 |
| 1 | TP_555OUT | Test_Point_1mm | TP14 |
| 1 | TP_339+_ORANGE | Test_Point_1mm | TP15 |
| 1 | TP_339- | Test_Point_1mm | TP16 |
| 1 | TP_MODEBTN | Test_Point_1mm | TP17 |
| 1 | TP_BRIGHTBTN | Test_Point_1mm | TP18 |
| 1 | TP_SWDIO | Test_Point_1mm | TP19 |
| 1 | TP_SWCLK | Test_Point_1mm | TP20 |
| 2 | TP_~RST | Test_Point_1mm | TP21, TP25 |
| 1 | TP_SDA | Test_Point_1mm | TP22 |
| 1 | TP_SCL | Test_Point_1mm | TP23 |
| 1 | TP_IS_SDB | Test_Point_1mm | TP24 |
| 1 | TP_BOOT | Test_Point_1mm | TP26 |
| 1 | TP_555TRIG | Test_Point_1mm | TP30 |
| 1 | SS34 | D_SMA | D1 |
| 1 | LED_GREEN1_RED2 | LED_0606 (Dual - 0603x2) | D2 |
| 1 | 2V5 Zener | D_MiniMELF_Handsoldering | D3 |
| 1 | LED_BLUE | D_0805 | D4 |
| 1 | LED_GREEN | D_0805 | D5 |
| 1 | LED_YELLOW | D_0805 | D6 |
| 1 | LED_ORANGE | D_0805 | D7 |
| 1 | LED_RED | D_0805 | D8 |
| 1 | LED_Small | LED_0805 | D9 |
| 1 | L | inductor_smd_0805 | L1 |
| 1 | 22µH | Inductor_Wurth_HCM-7070 | L2 |
| 2 | 10nF | C_0805 | C1, C11 |
| 4 | 100nF | C_0805 | C2, C9, C13, C15 |
| 2 | 4.7µF | C_0805 | C3, C10 |
| 2 | 22µF | C_0805 | C4, C5 |
| 2 | 33µF | C_0805 | C6, C7 |
| 2 | 100n | C_0805 | C8, C17 |
| 2 | 1µF | C_0805 | C12, C14 |
| 2 | 10µF | C_0805 | C16, C18 |
| 2 | 100k | R_0805 | R1, R11 |
| 6 | 1k | R_0805 | R2, R5, R6, R8, R13, R19 |
| 2 | 1k2 | R_0805 | R3, R21 |
| 1 | 7.5k | R_0805 | R4 |
| 1 | 100R | R_0805 | R7 |
| 2 | 4k7 | R_0805 | R9, R10 |
| 1 | 3k9 | R_0805 | R12 |
| 3 | 680R | R_0805 | R14, R16, R20 |
| 2 | 2k | R_0805 | R15, R24 |
| 1 | 4k3 | R_0805 | R17 |
| 1 | 1M | R_0805 | R18 |
| 2 | 2k7 | R_0805 | R22, R28 |
| 1 | 8k66 | R_0805 | R23 |
| 1 | 27k | R_0805 | R25 |
| 1 | 30k | R_0805 | R26 |
| 1 | 3k3 | R_0805 | R27 |
| 1 | 10k | R_0805 | R29 |
Pride Badge design files
The KiCad project lives in the aziraphale/pride-badge-v1 repository on GitHub; these links point at the commit this page was built from.
- LayoutPride Badge.kicad_pcb
Pride Badge: common questions
What microcontroller does the Pride Badge use?
The Pride Badge is built around the STM32F042F6P6, from the STM32 family.
How big is the Pride Badge PCB?
The Pride Badge measures 65.2 × 72.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pride Badge?
128 components, from 102 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pride Badge design files?
From the aziraphale/pride-badge-v1 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pride Badge design in my own project?
The repository has no license, so all rights stay with aziraphale. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pride Badge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in pride-badge-v1
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k