21 open source boards using the FS8205
Real designs built with the FS8205, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Le chiff ble
MangoIV
228.4 × 85 mm114 parts2LGPL-3.052KlackerBS
weteor
266.5 × 99 mm149 parts2LCERN-OHL-P-2.028Lipo stamp proto
jamesmunns
45.7 × 45.7 mm94 parts4LNo license17Raspberry Pi
Gameboy dmg
alxhoff
82.5 × 87.5 mm52 parts2LGPL-3.04ESP8266
Rodi
rodibot
50 × 50 mm48 parts2LNo license4Nordic nRF
Orthus
Hob-dev
133.7 × 95.6 mm318 parts2LCC-BY-NC-4.01Nordic nRF
Alleycat left
hextral
139.8 × 136.9 mm116 parts2LNo license1Kubisat power v2
gredzikk
80 × 80 mm77 parts2LMIT1Nordic nRF
Pockey
Hob-dev
94.4 × 72.4 mm57 parts2LNo license1Split-Keyboard
MadAvidCoder
294.2 × 112.3 mm250 parts2LMIT0STM32
Pride Badge
aziraphale
65.2 × 72.2 mm128 parts2LNo license0ESP32
Lacarriere station
pier-cbd
92 × 92 mm78 parts2LNo license0ESP32
ESP-32-ruler
rapha-tech
38 × 151.9 mm58 parts2LNo license0Le chiff ble hotswap
MangoIV
230 × 85 mm114 parts2LGPL-3.052Panel2
jamesmunns
80.1 × 80.1 mm33 parts4LNo license17Batt
HarkonenBade
25 × 18 mm20 parts2LCC-BY-SA-4.03Nordic nRF
Alleycat right
hextral
139.8 × 136.9 mm116 parts2LNo license1ORCA power board
UEC-RMF-Rescue
73 × 82 mm128 parts4LNo license0STM32
Pride Badge prototype
aziraphale
100 × 130 mm92 parts2LNo license0Panel
jamesmunns
71.1 × 71.1 mm31 parts4LNo license17Nordic nRF
Alleycat
hextral
225 × 136 mm115 parts2LNo license1
How designs wire the FS8205
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the FS8205 connects to, and the resistors, capacitors and other passives placed on it.
- The D12 pins is left unconnected on 80% of them (GND on 2, a signal on 4).
- The S1 pin has a series capacitor on 9 of 15 designs, most often 100 nF.
- The S2 pin is tied to GND on 67% of them (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| S1pin 1 | Connected to: DW01A 40%, a connector 27% · not connected 20% |
|
| D12pin 2, 5 | Connected to: Not connected 80% | — |
| S2pin 3 | Connected to: GND 67% · a signal 33% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Le chiff ble by MangoIV, KlackerBS by weteor, Lipo stamp proto by jamesmunns and Gameboy dmg pcb by alxhoff.
The FS8205 in open source designs
The gallery holds 21 open source boards using the FS8205 from 15 GitHub repositories; a typical one measures about 92 × 85 mm and carries around 94 components.
81% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Le chiff ble by MangoIV.
Parts used alongside the FS8205
Microcontrollers on boards using the FS8205
What boards using the FS8205 are built for
FS8205: common questions
Where can I find a FS8205 reference design?
Each of the 21 boards on this page is a real design using the FS8205. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FS8205 D12 pin connected?
The D12 pins is left unconnected on 80% of them (GND on 2, a signal on 4). Counted from the KiCad layouts of 15 open source designs using the FS8205.
How is the FS8205 S1 pin connected?
The S1 pin has a series capacitor on 9 of 15 designs, most often 100 nF. Counted from the KiCad layouts of 15 open source designs using the FS8205.
How is the FS8205 S2 pin connected?
The S2 pin is tied to GND on 67% of them (a signal on 6). Counted from the KiCad layouts of 15 open source designs using the FS8205.
What parts are used alongside the FS8205?
The TP4056, DW01A, USBLC6-2SC6, FS312F-G and MT3608 appear in the most repositories here.
Which microcontrollers do boards using the FS8205 use?
Most are built on Nordic nRF (5), ESP32 (2), STM32 (2) and ESP8266 (1).
How big is a typical board using the FS8205?
The median is 92 × 85 mm, and 81% are two-layer designs.
What is the most popular open source board using the FS8205?
By GitHub stars, Le chiff ble by MangoIV, with 52 stars.
Can I simulate one of these boards using the FS8205 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.