Ltc3374-test
About the Ltc3374-test PCB
Ltc3374-test is an open source PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 74 × 58 mm, with 71 components from 21 distinct parts.
Other key parts include the LTC3374-QFN. By type, the board carries 21 capacitors, 18 resistors, 13 connectors, 8 test points, 6 inductors and 4 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
Main components on the Ltc3374-test
Ltc3374-test bill of materials (BOM)
71 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC3374-QFN | QFN_38_0.5MM_5x7MM | U1 |
| 1 | BARREL_JACK | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J1 |
| 7 | CONN_01X02 | CONN_HEADER_2.54MM_1x2 | J2, J3, J4, J5, J11, J12, J13 |
| 5 | CONN_01X02 | TERMBLOCK_PHOENIX_COMBICON_3.5MM_2POS_1984617 | J6, J7, J8, J9, J10 |
| 6 | U.FL | CONN_U.FL_TE_1909763-1 | TP2, TP3, TP4, TP5, TP6, TP7 |
| 2 | TESTPAD | TESTPOINT_SMT_KEYSTONE_5016 | TP8, TP9 |
| 4 | GREEN | EIA_0603_CAP_NOSILK | D1, D2, D3, D4 |
| 4 | 2.2 uH | INDUCTOR_YUDEN_NRS5030 | L1, L2, L3, L4 |
| 2 | FERRITE | EIA_0603_INDUCTOR_NOSILK | L5, L6 |
| 5 | 10 uF | EIA_0805_CAP_NOSILK | C1, C2, C4, C7, C11 |
| 6 | C1005X7R1C104K050BC | EIA_0402_CAP_NOSILK | C3, C8, C20, C21, C22, C23 |
| 1 | DNP | EIA_0402_CAP_NOSILK | C5 |
| 2 | DNP | EIA_1210_CAP_NOSILK | C6, C9 |
| 5 | 22 uF | EIA_1206_CAP_NOSILK | C16, C17, C18, C19, C26 |
| 2 | 47 uF | EIA_1210_CAP_NOSILK | C24, C25 |
| 1 | 10K | EIA_0402_RES_NOSILK | R1 |
| 4 | 806K | EIA_0402_RES_NOSILK | R2, R4, R6, R8 |
| 4 | 649K | EIA_0402_RES_NOSILK | R3, R5, R7, R9 |
| 4 | 10K | EIA_0402_RES_NOSILK_FLIPCHIP | R10, R11, R12, R13 |
| 4 | 470 | EIA_0402_RES_NOSILK_FLIPCHIP | R14, R15, R16, R17 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1K | EIA_0402_RES_NOSILK | R18 |
Ltc3374-test design files
The KiCad project lives in the azonenberg/misc-devboards repository on GitHub; these links point at the commit this page was built from.
Ltc3374-test: common questions
How big is the Ltc3374-test PCB?
The Ltc3374-test measures 74 × 58 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ltc3374-test?
71 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ltc3374-test design files?
From the azonenberg/misc-devboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ltc3374-test design in my own project?
Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.
More boards in misc-devboards
STM32Kup lulz
154.5 × 137 mm376 parts4LBSD-3-Clause17
STM32Fpga stm32-ifaces
90 × 94.5 mm267 parts6LBSD-3-Clause17
STM32Baset1-media converter
100.5 × 62.5 mm173 parts4LBSD-3-Clause17
Ksz9031-eval
77 × 71.5 mm167 parts4LBSD-3-Clause17
FPGAFpga test kintex676-artix484
73 × 88 mm152 parts4LBSD-3-Clause17
Lpr rgmii phy
35 × 73.5 mm82 parts4LBSD-3-Clause17
Tragiclaser phy
105 × 28.5 mm79 parts4LBSD-3-Clause17
STM32Christmas tree
66 × 93.5 mm61 parts2LBSD-3-Clause17
STM32T20-l431-som
10.1 × 12.2 mm54 parts4LBSD-3-Clause17
Qsfp to arc6
90 × 43 mm37 parts4LBSD-3-Clause17
PICPic32mx jtag
73 × 54 mm36 parts4LBSD-3-Clause17
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979