Qsfp to arc6
About the Qsfp to arc6 PCB
Qsfp to arc6 is an open source PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 90 × 43 mm, with 37 components from 17 distinct parts.
Other key parts include the TCA6424A. By type, the board carries 10 capacitors, 9 resistors, 5 connectors, 4 diodes, 4 inductors and 3 test points.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
Main components on the Qsfp to arc6
Qsfp to arc6 bill of materials (BOM)
37 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCA6424A | QFN_32_0.5MM_5x5MM | U1 |
| 1 | ARF6-08-S-D-A-K-TR | CONN_SAMTEC_ARF6-08-S-D-A-K-TR | J1 |
| 1 | CONN_QSFP_HOST | CONN_ZQSFP+_TE_1551920-2 | J2 |
| 1 | QSFP_CAGE | CONN_ZQSFP+_CAGE_TE_4-2170705-5 | J3 |
| 1 | BARREL_JACK | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J4 |
| 1 | PMOD_DEVICE | CONN_HEADER_2.54MM_2x6_RA_PMOD_MODULE | J5 |
| 1 | 2A | EIA_0603_CAP_NOSILK | F1 |
| 3 | U.FL | CONN_U.FL_TE_1909763-1 | TP1, TP2, TP3 |
| 4 | GREEN | EIA_0402_LED | D1, D2, D3, D4 |
| 1 | MI0603J601R-10 | EIA_0603_INDUCTOR_NOSILK | FB1 |
| 3 | 1 uH | EIA_0805_INDUCTOR_NOSILK | L1, L2, L3 |
| 4 | 22 uF | EIA_1210_CAP_NOSILK | C1, C3, C4, C5 |
| 4 | 0.1 uF | EIA_0402_CAP_NOSILK | C2, C6, C7, C8 |
| 2 | 0.47 uF | EIA_0402_CAP_NOSILK | C9, C10 |
| 3 | 10K | EIA_0402_RES_NOSILK | R1, R2, R4 |
| 2 | 4.7K | EIA_0402_RES_NOSILK | R3, R5 |
| 4 | 33K | EIA_0402_RES_NOSILK | R7, R8, R9, R10 |
Qsfp to arc6 design files
The KiCad project lives in the azonenberg/misc-devboards repository on GitHub; these links point at the commit this page was built from.
Qsfp to arc6: common questions
How big is the Qsfp to arc6 PCB?
The Qsfp to arc6 measures 90 × 43 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Qsfp to arc6?
37 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Qsfp to arc6 design files?
From the azonenberg/misc-devboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Qsfp to arc6 design in my own project?
Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.
More boards in misc-devboards
STM32Kup lulz
154.5 × 137 mm376 parts4LBSD-3-Clause17
STM32Fpga stm32-ifaces
90 × 94.5 mm267 parts6LBSD-3-Clause17
STM32Baset1-media converter
100.5 × 62.5 mm173 parts4LBSD-3-Clause17
Ksz9031-eval
77 × 71.5 mm167 parts4LBSD-3-Clause17
FPGAFpga test kintex676-artix484
73 × 88 mm152 parts4LBSD-3-Clause17
Lpr rgmii phy
35 × 73.5 mm82 parts4LBSD-3-Clause17
Tragiclaser phy
105 × 28.5 mm79 parts4LBSD-3-Clause17
Ltc3374-test
74 × 58 mm71 parts4LBSD-3-Clause17
STM32Christmas tree
66 × 93.5 mm61 parts2LBSD-3-Clause17
STM32T20-l431-som
10.1 × 12.2 mm54 parts4LBSD-3-Clause17
PICPic32mx jtag
73 × 54 mm36 parts4LBSD-3-Clause17
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979