7 open source boards using the LTC3374-QFN

Real designs built with the LTC3374-QFN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LTC3374-QFN

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LTC3374-QFN connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN1 pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 10 µF).
  • The SW1 pin has a inductor on 5 of 5 designs, most often 2.2 µH.
  • The VIN3 pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 470 nF).
  • The SW3 pin has a inductor on 5 of 5 designs, most often 2.2 µH.
FB1pin 1Connected to: 3.3V 60% · a signal 40%
VIN1pin 2Connected to: 5V 100%
  • Decoupling capacitor on 100% · 22 µF (8), 10 µF (6), 470 nF (4)
SW1pin 3Connected to: 3.3V 60% · a signal 40%
  • Inductor on 100% · 2.2 µH (4)
SW2pin 4Connected to: 3.3V 40% · not connected 20% · a signal 40%
  • Inductor on 80% · 2.2 µH (3)
VIN2pin 5Connected to: 5V 80% · GND 20%
  • Decoupling capacitor on 80% · 22 µF (9), 470 nF (5), 10 µF (2)
FB2pin 6Connected to: 5V 80% · GND 20%
FB3pin 7Connected to: 5V 100%
VIN3pin 8Connected to: 5V 100%
  • Decoupling capacitor on 100% · 22 µF (10), 470 nF (5), 10 µF (5)
SW3pin 9Connected to: Signal 60% · 1.2V 40%
  • Inductor on 100% · 2.2 µH (4)
SW4pin 10Connected to: Signal 60% · not connected 20% · 1.2V 20%
  • Inductor on 80% · 2.2 µH (3)
VIN4pin 11Connected to: 5V 80% · GND 20%
  • Decoupling capacitor on 80% · 22 µF (10), 470 nF (4), 10 µF (3)
FB4pin 12Connected to: 5V 80% · GND 20%
EN4pin 13Connected to: GND 60% · VBUS_SHOUT 40%
  • Capacitor to GND on 40% · 470 nF (4), 10 µF (3), 22 µF (1)
EN3pin 14Connected to: GND 60% · 2.5V 40%
PGOOD_ALLpin 15Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 80% · 1 kΩ (3), 10 kΩ (1)
SYNCpin 16Connected to: GND 100%
RTpin 17Connected to: 5V 100%
EN6pin 18Connected to: GND 60% · 5V 40%
EN5pin 19Connected to: 5V 100%
FB5pin 20Connected to: 1.8V 60% · a signal 40%
VIN5pin 21Connected to: 5V 100%
  • Decoupling capacitor on 100% · 22 µF (7), 10 µF (5), 470 nF (4)
SW5pin 22Connected to: Signal 60% · 1V 40%
  • Inductor on 100% · 2.2 µH (4)
SW6pin 23Connected to: Signal 60% · not connected 20% · 3.3V 20%
  • Inductor on 60% · 2.2 µH (3)
VIN6pin 24Connected to: 5V 80% · GND 20%
  • Decoupling capacitor on 80% · 22 µF (8), 470 nF (5), 10 µF (4)
FB6pin 25Connected to: 5V 60% · GND 20% · a signal 20%
FB7pin 26Connected to: 1V 40% · GND 20% · a signal 40%
  • Resistor to GND on 40% · 475 kΩ (1), 649 kΩ (1)
  • Pull-up to 2.5V on 40% · 1.02 MΩ (1), 806 kΩ (1)
VIN7pin 27Connected to: 5V 80% · GND 20%
  • Decoupling capacitor on 80% · 22 µF (9), 470 nF (5), 10 µF (3)
SW7pin 28Connected to: 1V 40% · not connected 20% · a signal 40%
  • Inductor on 60% · 2.2 µH (3)
SW8pin 29Connected to: 1V 40% · not connected 20% · a signal 40%
  • Inductor on 80% · 2.2 µH (3)
VIN8pin 30Connected to: 5V 80% · GND 20%
  • Decoupling capacitor on 80% · 22 µF (8), 470 nF (4), 10 µF (4)
FB8pin 31Connected to: VBUS_SHOUT 40% · GND 20% · a signal 40%
  • Resistor to GND on 40% · 324 kΩ (1), 475 kΩ (1)
  • Pull-up to 3.3V on 40% · 1.02 MΩ (2)
EN8pin 32Connected to: 5V 60% · GND 40%
EN7pin 33Connected to: 5V 80% · GND 20%
MODEpin 34Connected to: 5V 60% · GND 20% · a signal 20%
VCCpin 35Connected to: 5V 100%
  • Decoupling capacitor on 100% · 22 µF (10), 10 µF (6), 470 nF (4)
EN2pin 37Connected to: GND 100%
EN1pin 38Connected to: 5V 100%
GNDpin PADConnected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gp4-hil by azonenberg, Cat5-tdr by azonenberg, Main pcb by azonenberg and Baset1-media converter by azonenberg.

The LTC3374-QFN in open source designs

The gallery holds 7 open source boards using the LTC3374-QFN from 5 GitHub repositories; a typical one measures about 100.5 × 62.5 mm and carries around 266 components.

100% use four copper layers or more, and 86% carry an open source license.

The most starred is Gp4-hil by azonenberg.

Microcontrollers on boards using the LTC3374-QFN

What boards using the LTC3374-QFN are built for

LTC3374-QFN: common questions

Where can I find a LTC3374-QFN reference design?

Each of the 7 boards on this page is a real design using the LTC3374-QFN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LTC3374-QFN VIN1 pin?

The VIN1 pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LTC3374-QFN.

How is the LTC3374-QFN SW1 pin connected?

The SW1 pin has a inductor on 5 of 5 designs, most often 2.2 µH. Counted from the KiCad layouts of 5 open source designs using the LTC3374-QFN.

What decoupling capacitors do designs use on the LTC3374-QFN VIN3 pin?

The VIN3 pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 470 nF). Counted from the KiCad layouts of 5 open source designs using the LTC3374-QFN.

What parts are used alongside the LTC3374-QFN?

The KSZ9031RN, 125 MHz, 25 MHz, ECS-1612MV-250-CN and RCLAMP0514M appear in the most repositories here.

Which microcontrollers do boards using the LTC3374-QFN use?

Most are built on STM32 (3) and FPGA (2).

How big is a typical board using the LTC3374-QFN?

The median is 100.5 × 62.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the LTC3374-QFN?

By GitHub stars, Gp4-hil by azonenberg, with 260 stars.

Can I simulate one of these boards using the LTC3374-QFN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part