HardLabs

Fpga test kintex676-artix484

azonenberg·misc-devboards·fpga-test-kintex676-artix484/fpga-test-kintex676-artix484.kicad_pcb

Fpga test kintex676-artix484 PCB layout, top view — open source FPGA board by azonenberg
Simulate this board

About the Fpga test kintex676-artix484 PCB

Fpga test kintex676-artix484 is an open source FPGA PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 73 × 88 mm, with 152 components from 30 distinct parts.

Its main chip is the XC7A35T-2FBG484C, from the FPGA family. Other key parts include the SIT9121AI-2BF-XXS156.250000G, ECS-1612MV-250-CN, XC7K160T-2FFG676, ZLDO1117-33 and MUN12AD03-SE. By type, the board carries 80 capacitors, 39 resistors, 11 ICs, 11 connectors, 10 diodes and 1 fuse.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

Main components on the Fpga test kintex676-artix484

XC7A35T-2FBG484CSIT9121AI-2BF-XXS156.250000GECS-1612MV-250-CNXC7K160T-2FFG676ZLDO1117-33MUN12AD03-SE

Fpga test kintex676-artix484 bill of materials (BOM)

152 components, 30 distinct parts.

QtyPartRefs
1
XC7A35T-2FBG484C
U1
3
SIT9121AI-2BF-XXS156.250000G
U2, U8, U11
2
ECS-1612MV-250-CN
U3, U5
1
XC7K160T-2FFG676
U4
1
ZLDO1117-33
U6
3
MUN12AD03-SE
U7, U9, U10
8
SMPM
J1, J2, J3, J4, J7, J8, J9, J10
2
XILINX_JTAG
J5, J6
1
BARREL_JACK
J11
1
2A
F1
10
GREEN
D1, D2, D3, D4, D5, D6, D7, D8 +2
4
100 uF
C1, C3, C4, C56
22
0.47 uF
C2, C7, C8, C12, C13, C17, C18, C20 +14
15
4.7 uF
C5, C6, C9, C10, C11, C14, C15, C16 +7
22
0.1 uF
C30, C31, C32, C33, C40, C41, C42, C43 +14
8
22 uF
C37, C39, C47, C48, C51, C52, C54, C55
2
330 uF
C38, C49
3
22 uF
C46, C50, C53
4
47 uF
C60, C61, C62, C63
2
100
R1, R35
Show 10 more
QtyPartRefs
4
33
R2, R3, R7, R8
8
0
R4, R5, R6, R10, R13, R14, R15, R39
2
0
R9, R26
10
33K
R11, R27, R28, R29, R30, R31, R32, R33 +2
4
4.7K
R12, R25, R37, R38
3
10K
R16, R19, R22
1
200K
R17
3
100K
R18, R20, R21
1
187K
R23
1
280K
R24

Fpga test kintex676-artix484 design files

The KiCad project lives in the azonenberg/misc-devboards repository on GitHub; these links point at the commit this page was built from.

Fpga test kintex676-artix484: common questions

What microcontroller does the Fpga test kintex676-artix484 use?

The Fpga test kintex676-artix484 is built around the XC7A35T-2FBG484C, from the FPGA family.

How big is the Fpga test kintex676-artix484 PCB?

The Fpga test kintex676-artix484 measures 73 × 88 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Fpga test kintex676-artix484?

152 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fpga test kintex676-artix484 design files?

From the azonenberg/misc-devboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fpga test kintex676-artix484 design in my own project?

Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.

Can I test firmware for the Fpga test kintex676-artix484 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in misc-devboards

Similar boards