Lpr rgmii phy
About the Lpr rgmii phy PCB
Lpr rgmii phy is an open source PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 35 × 73.5 mm, with 82 components from 22 distinct parts.
Other key parts include the MUN12AD03-SE, ECS-1612MV-250-CN, KSZ9031RN and RCLAMP0514M. By type, the board carries 35 capacitors, 26 resistors, 9 test points, 6 ICs, 4 inductors and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
Main components on the Lpr rgmii phy
Lpr rgmii phy bill of materials (BOM)
82 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MUN12AD03-SE | MODULE_CYNTEC_MUN12AD03-SE | U1, U2 |
| 1 | ECS-1612MV-250-CN | OSCILLATOR_1.6x1.2 | U3 |
| 1 | KSZ9031RN | QFN_48_0.5MM_7x7MM | U4 |
| 2 | RCLAMP0514M | SOP_10_0.5MM_3MM | U5, U6 |
| 1 | LPR_HEADER | CONN_HEADER_2.0MM_2x20_SMT_MOLEX_0877594014 | J1 |
| 1 | 0826-1G1T-23-F | CONN_BELFUSE_0826_1G1T_23_F | J2 |
| 6 | U.FL | CONN_U.FL_TE_1909763-1 | TP1, TP2, TP3, TP4, TP5, TP6 |
| 2 | TESTPOINT | TESTPOINT_SMT_0.5MM | TP7, TP9 |
| 1 | TESTCLIP | TESTPOINT_SMT_KEYSTONE_5016 | TP8 |
| 4 | MI0603J601R-10 | EIA_0603_INDUCTOR_NOSILK | FB1, FB2, FB3, FB4 |
| 2 | 22 uF | EIA_1812_CAP_NOSILK | C1, C4 |
| 4 | 22 uF | EIA_1210_CAP_NOSILK | C2, C3, C5, C6 |
| 16 | 0.47 uF | EIA_0402_CAP_NOSILK | C7, C17, C18, C23, C24, C25, C26, C27 +8 |
| 9 | 4.7 uF | EIA_0603_CAP_NOSILK | C8, C9, C10, C11, C12, C19, C20, C21 +1 |
| 4 | 0.1 uF | EIA_0402_CAP_NOSILK | C13, C14, C15, C16 |
| 3 | 100K | EIA_0402_RES_NOSILK | R1, R3, R4 |
| 1 | 22.1K | EIA_0402_RES_NOSILK | R2 |
| 2 | 470 | EIA_0402_RES_NOSILK | R5, R6 |
| 7 | 33 | EIA_0402_RES_NOSILK | R7, R9, R10, R11, R12, R13, R14 |
| 3 | 1K | EIA_0402_RES_NOSILK | R8, R16, R24 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 12.1K 1% | EIA_0402_RES_NOSILK | R15 |
| 9 | 10K | EIA_0402_RES_NOSILK | R17, R18, R19, R20, R21, R22, R23, R25 +1 |
Lpr rgmii phy design files
The KiCad project lives in the azonenberg/misc-devboards repository on GitHub; these links point at the commit this page was built from.
Lpr rgmii phy: common questions
How big is the Lpr rgmii phy PCB?
The Lpr rgmii phy measures 35 × 73.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Lpr rgmii phy?
82 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lpr rgmii phy design files?
From the azonenberg/misc-devboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lpr rgmii phy design in my own project?
Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.
More boards in misc-devboards
STM32Kup lulz
154.5 × 137 mm376 parts4LBSD-3-Clause17
STM32Fpga stm32-ifaces
90 × 94.5 mm267 parts6LBSD-3-Clause17
STM32Baset1-media converter
100.5 × 62.5 mm173 parts4LBSD-3-Clause17
Ksz9031-eval
77 × 71.5 mm167 parts4LBSD-3-Clause17
FPGAFpga test kintex676-artix484
73 × 88 mm152 parts4LBSD-3-Clause17
Tragiclaser phy
105 × 28.5 mm79 parts4LBSD-3-Clause17
Ltc3374-test
74 × 58 mm71 parts4LBSD-3-Clause17
STM32Christmas tree
66 × 93.5 mm61 parts2LBSD-3-Clause17
STM32T20-l431-som
10.1 × 12.2 mm54 parts4LBSD-3-Clause17
Qsfp to arc6
90 × 43 mm37 parts4LBSD-3-Clause17
PICPic32mx jtag
73 × 54 mm36 parts4LBSD-3-Clause17
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979