9 open source boards using the AMS1117-33
Real designs built with the AMS1117-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Z2m partner
smarthomefans
50 × 50 mm50 parts2LNo license187STM32
Lboard2
electrodyssey
203.2 × 101.6 mm214 parts4LLGPL-3.07R2022-12
karlp
100 × 80 mm134 parts4LNo license3Hw lower v2
oresk
102 × 104.8 mm96 parts4LNo license0PIC
Pic dev board
bablokb
100 × 100 mm73 parts2LCC-BY-SA-4.00ESP32
Kcell faker
karlp
80 × 60 mm62 parts4LNo license0R2022-10
karlp
100 × 80 mm133 parts4LNo license3PIC
Pic20-dev
bablokb
42.8 × 35 mm21 parts2LCC-BY-SA-4.00ESP32
MusicBrain AXON - ESP32-S3 netbridge
MarkWestbroek
70 × 45 mm48 parts2LMIT0
How designs wire the AMS1117-33
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AMS1117-33 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 86% | — |
| VIpin 3 | Connected to: 5V 86% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Z2m partner by smarthomefans, Lboard2 by electrodyssey, R2022-10 by karlp and Pic dev board by bablokb.
The AMS1117-33 in open source designs
The gallery holds 9 open source boards using the AMS1117-33 from 7 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 73 components.
56% use four copper layers or more, and 44% carry an open source license.
The most starred is Z2m partner by smarthomefans.
What boards using the AMS1117-33 are built for
AMS1117-33: common questions
Where can I find a AMS1117-33 reference design?
Each of the 9 boards on this page is a real design using the AMS1117-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AMS1117-33 VI pin?
The VI pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the AMS1117-33.
Which microcontrollers do boards using the AMS1117-33 use?
Most are built on ESP32 (3), PIC (2) and STM32 (1).
How big is a typical board using the AMS1117-33?
The median is 100 × 80 mm, and 44% are two-layer designs.
What is the most popular open source board using the AMS1117-33?
By GitHub stars, Z2m partner by smarthomefans, with 187 stars.
Can I simulate one of these boards using the AMS1117-33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.