2 open source boards using the SC7A20HTR

Real designs built with the SC7A20HTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SC7A20HTR in open source designs

The gallery holds 2 open source boards using the SC7A20HTR from 2 GitHub repositories; a typical one measures about 59.8 × 54.6 mm and carries around 107 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Universal Power Delivery and Control Board by Oscyloskop444.

Microcontrollers on boards using the SC7A20HTR

SC7A20HTR: common questions

Where can I find a SC7A20HTR reference design?

Each of the 2 boards on this page is a real design using the SC7A20HTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SC7A20HTR use?

Most are built on RISC-V (1) and RP2040/RP2350 (1).

How big is a typical board using the SC7A20HTR?

The median is 59.8 × 54.6 mm, and 50% are two-layer designs.

What is the most popular open source board using the SC7A20HTR?

By GitHub stars, Universal Power Delivery and Control Board by Oscyloskop444, with 0 stars.

Can I simulate one of these boards using the SC7A20HTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part