HardLabs

Off axis end connector

BerkeleyLab·DxP-sensor-probes·off-axis_end_connector/off-axis_end_connector.kicad_pcb

Off axis end connector PCB layout, top view — open source board by BerkeleyLab
Simulate this board

About the Off axis end connector PCB

Off axis end connector is an open source PCB design by BerkeleyLab, published on GitHub under the Custom license license. It is a 2-layer board measuring 28.9 × 18.4 mm, with 7 components from 2 distinct parts.

By type, the board carries 6 test points and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

Hardware design for the DxP (Distributed sensor Profiling) sensor probe.

This repository contains the PCB designs for DxP (Distributed sensor Profiling) sensor probes—including sensor sections and the connector/extension pieces needed to assemble probe chains.

Not included: the data logger hardware (it lives in the separate DxP data logger repository). Not included: the mechanical probe tube/epoxy assembly instructions. This repo focuses on the PCB designs only.

Off axis end connector bill of materials (BOM)

7 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x06_MountingPin
J1
6
C1a
TP1, TP4, TP6, TP8, TP10, TP12

Off axis end connector design files

The KiCad project lives in the BerkeleyLab/DxP-sensor-probes repository on GitHub; these links point at the commit this page was built from.

Off axis end connector: common questions

How big is the Off axis end connector PCB?

The Off axis end connector measures 28.9 × 18.4 mm, has 2 copper layers and is 0.7874 mm thick.

How many components are on the Off axis end connector?

7 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Off axis end connector design files?

From the BerkeleyLab/DxP-sensor-probes repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Off axis end connector design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in DxP-sensor-probes

Similar boards