Sensor board outline
About the Sensor board outline
Sensor board outline is an open source PCB design by BerkeleyLab, published on GitHub under the Custom license license. It is a 2-layer board measuring 228.9 × 5.5 mm, with 14 components from 2 distinct parts.
It belongs with the sensors designs in this gallery.
From the project
Hardware design for the DxP (Distributed sensor Profiling) sensor probe.
This repository contains the PCB designs for DxP (Distributed sensor Profiling) sensor probes—including sensor sections and the connector/extension pieces needed to assemble probe chains.
Not included: the data logger hardware (it lives in the separate DxP data logger repository). Not included: the mechanical probe tube/epoxy assembly instructions. This repo focuses on the PCB designs only.
Sensor board outline bill of materials (BOM)
14 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | C1a | subsilk | TP1, TP4, TP6, TP8, TP10, TP12 |
| 8 | C1b | oval_hole_1 | TP2, TP3, TP5, TP7, TP9, TP11, TP13, TP14 |
Sensor board outline design files
The KiCad project lives in the BerkeleyLab/DxP-sensor-probes repository on GitHub; these links point at the commit this page was built from.
Sensor board outline: common questions
How big is the Sensor board outline?
The Sensor board outline measures 228.9 × 5.5 mm, has 2 copper layers and is 0.7874 mm thick.
How many components are on the Sensor board outline?
14 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensor board outline design files?
From the BerkeleyLab/DxP-sensor-probes repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sensor board outline design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in DxP-sensor-probes
TMP117-ADXL345 section 5cm
228.9 × 5.5 mm38 parts2LCustom license1
TMP117 section 10cm
228.9 × 5.5 mm38 parts2LCustom license1
TMP117 section 5cm
228.9 × 5.5 mm38 parts2LCustom license1
Extension board MF
228.9 × 5.5 mm12 parts2LCustom license1
FF connector
65.5 × 5.5 mm12 parts2LCustom license1
Off axis end connector
28.9 × 18.4 mm7 parts2LCustom license1
End connector
36 × 9.9 mm7 parts2LCustom license1
Extension board MM
299.1 × 5.5 mm6 parts2LCustom license1
Similar boards
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
FourThirdsEye
will127534
47 × 47 mm106 parts4LMIT377
VESC Controller
paltatech
160 × 90 mm908 parts2LNo license354
OneInchEye
39 × 39 mm79 parts4LMIT346