HardLabs

TMP117 section 10cm

BerkeleyLab·DxP-sensor-probes·TMP117_section_10cm/TMP117_section_10cm.kicad_pcb

TMP117 section 10cm PCB layout, top view — open source board by BerkeleyLab
Simulate this board

About the TMP117 section 10cm PCB

TMP117 section 10cm is an open source PCB design by BerkeleyLab, published on GitHub under the Custom license license. It is a 2-layer board measuring 228.9 × 5.5 mm, with 38 components from 12 distinct parts.

Other key parts include the SN74LVC1G175DCK and TMP117AIDRVR. By type, the board carries 12 test points, 10 resistors, 8 ICs and 8 capacitors.

It belongs with the sensors designs in this gallery.

From the project

Hardware design for the DxP (Distributed sensor Profiling) sensor probe.

This repository contains the PCB designs for DxP (Distributed sensor Profiling) sensor probes—including sensor sections and the connector/extension pieces needed to assemble probe chains.

Not included: the data logger hardware (it lives in the separate DxP data logger repository). Not included: the mechanical probe tube/epoxy assembly instructions. This repo focuses on the PCB designs only.

Main components on the TMP117 section 10cm

SN74LVC1G175DCKTMP117AIDRVR

TMP117 section 10cm bill of materials (BOM)

38 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
DNP
U1, U4
2
DNP
U2, U7
2
SN74LVC1G175DCK
U3, U5
2
TMP117AIDRVR
U6, U8
6
C1a
TP1, TP4, TP6, TP8, TP10, TP12
6
C1b
TP2, TP5, TP7, TP9, TP11, TP13
4
DNP
C1, C2, C4, C8
4
100n
C3, C5, C6, C7
2
0R
R1, R4
4
DNP
R2, R3, R6, R9
2
1k
R5, R7
2
470
R8, R10

TMP117 section 10cm design files

The KiCad project lives in the BerkeleyLab/DxP-sensor-probes repository on GitHub; these links point at the commit this page was built from.

TMP117 section 10cm: common questions

How big is the TMP117 section 10cm PCB?

The TMP117 section 10cm measures 228.9 × 5.5 mm, has 2 copper layers and is 0.7874 mm thick.

How many components are on the TMP117 section 10cm?

38 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TMP117 section 10cm design files?

From the BerkeleyLab/DxP-sensor-probes repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TMP117 section 10cm design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in DxP-sensor-probes

Similar boards