Clock circuit
bit4man·clock-circuit·clock/clock.kicad_pcb
About the Clock circuit PCB
Clock circuit is an open source PCB design by bit4man, published on GitHub. It is a 2-layer board measuring 145.4 × 95.5 mm, with 63 components from 33 distinct parts.
Other key parts include the LM7805, 74LS93, LM556, 74LS151 and 74LS00. By type, the board carries 18 resistors, 16 diodes, 13 capacitors, 10 ICs, 4 switches and 1 connector.
From the project
Clock Circuit for 7400 project
Main components on the Clock circuit
Clock circuit bill of materials (BOM)
63 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805 | TO-220-3_Vertical | U1 |
| 1 | 74LS93 | DIP-14_W7.62mm_Socket | U2 |
| 1 | LM556 | DIP-14_W7.62mm_Socket | U3 |
| 1 | 74LS151 | DIP-16_W7.62mm_Socket | U4 |
| 2 | 74LS00 | DIP-14_W7.62mm_Socket | U5, U9 |
| 1 | 74LS32 | DIP-14_W7.62mm_Socket | U6 |
| 1 | 74LS02 | DIP-14_W7.62mm_Socket | U7 |
| 1 | 74LS04 | DIP-14_W7.62mm_Socket | U8 |
| 1 | LM555 | DIP-8_W7.62mm_Socket | U10 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | 500K | Potentiometer_ACP_CA9-H5_Horizontal | RV1 |
| 1 | SW_Clock | SW_PUSH_6mm | SW1 |
| 1 | CLK_SEL | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW2 |
| 1 | SW_Step | SW_PUSH_6mm | SW3 |
| 1 | SW_MANUAL_CLK | SW_PUSH_6mm | SW4 |
| 15 | LED_Small | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +7 |
| 1 | D | D_DO-41_SOD81_P7.62mm_Horizontal | D16 |
| 1 | 1uF | CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 100uF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 330nF | CP_Radial_D5.0mm_P2.50mm | C3 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF | CP_Radial_D5.0mm_P2.50mm | C4 |
| 2 | 30pF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C5, C6 |
| 1 | 1uF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C7 |
| 5 | 10pF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C8, C9, C10, C11, C13 |
| 1 | 10uF | CP_Radial_D4.0mm_P2.00mm | C12 |
| 5 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R8, R9, R13, R15 |
| 3 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R10 |
| 3 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R12 |
| 3 | 2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7, R11 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R16 |
| 1 | R_Network04 | R_Array_SIP5 | RN1 |
| 1 | 470 | R_Array_SIP6 | RN2 |
Clock circuit design files
The KiCad project lives in the bit4man/clock-circuit repository on GitHub; these links point at the commit this page was built from.
- Layoutclock/clock.kicad_pcb
Clock circuit: common questions
How big is the Clock circuit PCB?
The Clock circuit measures 145.4 × 95.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clock circuit?
63 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Clock circuit design files?
From the bit4man/clock-circuit repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Clock circuit design in my own project?
The repository has no license, so all rights stay with bit4man. Use it as a reference, and ask the author before reusing the design.