Bobbycar boardcomputer hardware
bobbycar-graz·bobbycar-boardcomputer-hardware·kicad/bobbycar.kicad_pcb
About the Bobbycar boardcomputer hardware PCB
Bobbycar boardcomputer hardware is an open source ESP32 PCB design by bobbycar-graz, published on GitHub. It is a 2-layer board measuring 42 × 45 mm, with 66 components from 34 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the SN65HVD231, USBLC6-4SC6, MPM2359 and MCP1416. By type, the board carries 18 resistors, 12 diodes, 12 capacitors, 11 connectors, 9 ICs and 1 transistor.
Main components on the Bobbycar boardcomputer hardware
Bobbycar boardcomputer hardware bill of materials (BOM)
66 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | SN65HVD231 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 5 | USBLC6-4SC6 | SOT-23-6 | U3, U4, U6, U7, U8 |
| 1 | MPM2359 | SOT-23-6 | U5 |
| 1 | MCP1416 | SOT-23-5 | U9 |
| 1 | SI2301CDS-T1-GE3 | SOT-23 | Q1 |
| 1 | IO2 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 2 | DNP GAS | PinHeader_1x03_P2.54mm_Vertical | J3, J8 |
| 1 | DNP TFT | PinSocket_1x09_P2.54mm_Vertical | J4 |
| 2 | CONN_02X08_ODD_EVEN Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | J5, J6 |
| 2 | DNP BREMSE | PinHeader_1x03_P2.54mm_Vertical | J7, J10 |
| 1 | CAN2 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J11 |
| 1 | DNP PROG | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J12 |
| 1 | LED | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J13 |
| 1 | Buzzer | CP_Elec_18x22 | BZ1 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | NUP2105L | SOT-23 | D1 |
| 8 | BAV99 | SOT-23 | D4, D7, D8, D9, D10, D11, D12, D13 |
| 2 | B230A | D_SMA | D5, D6 |
| 1 | D | D_SOD-123 | D14 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7UH 4.7uH | L_5040 | L2 |
| 7 | 100N 100n | C_0603_1608Metric | C1, C3, C4, C5, C6, C7, C8 |
| 1 | 10U 10u | C_0603_1608Metric | C2 |
| 1 | 1u | R_0805_2012Metric | C10 |
| 2 | 22UF 22uF | C_0805_2012Metric | C13, C15 |
| 1 | 10N 10n | C_0603_1608Metric | C14 |
| 4 | 1k | R_0603_1608Metric | R1, R5, R14, R15 |
| 4 | 100R 100r | R_0603_1608Metric | R2, R9, R11, R12 |
| 2 | 56R | R_0603_1608Metric | R3, R4 |
| 1 | 49.9K 49.9k | R_0603_1608Metric | R6 |
| 1 | 16.2K 16.2k | R_0603_1608Metric | R7 |
| 4 | 100K 100k | R_0603_1608Metric | R8, R10, R13, R16 |
| 1 | 2K2 2k2 | R_0603_1608Metric | R19 |
| 1 | 4.7K 4.7k | R_0603_1608Metric | R21 |
Bobbycar boardcomputer hardware design files
The KiCad project lives in the bobbycar-graz/bobbycar-boardcomputer-hardware repository on GitHub; these links point at the commit this page was built from.
Bobbycar boardcomputer hardware: common questions
What microcontroller does the Bobbycar boardcomputer hardware use?
The Bobbycar boardcomputer hardware is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Bobbycar boardcomputer hardware PCB?
The Bobbycar boardcomputer hardware measures 42 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bobbycar boardcomputer hardware?
66 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bobbycar boardcomputer hardware design files?
From the bobbycar-graz/bobbycar-boardcomputer-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bobbycar boardcomputer hardware design in my own project?
The repository has no license, so all rights stay with bobbycar-graz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bobbycar boardcomputer hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k