Coffee
brensch·coffee·hardware/controller/build/coffee-controller-120v.net
About the Coffee PCB
Coffee is an open source ESP32 PCB design by brensch, published on GitHub. It is a board, with 86 components from 48 distinct parts.
Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the AMS1117-3.3, MAX31855KASA+, ADS1115IDGSR, H11AA1 and USBLC6-2SC6. By type, the board carries 33 resistors, 19 capacitors, 13 connectors, 9 diodes, 6 ICs and 3 transistors.
From the project
Brendiom8
Schematic as code (SKiDL). The design, the calculations and the layout rules are in docs/CIRCUIT.md.
build/ holds the generated KiCad netlist (import it into KiCad's PCB editor: File → Import → Netlist) and the BOM CSVs. Generation fails if the ERC, the isolation check, the firmware pin-map check or the boot-safe SSR check fails.
Main components on the Coffee
Coffee bill of materials (BOM)
86 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-C6-WROOM-1-N8 | ESP32-C6-WROOM-1 | U2 |
| 1 | MAX31855KASA+ | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | ADS1115IDGSR | MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | H11AA1 | SMDIP-6_W9.53mm | U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U6 |
| 3 | AO3400A | SOT-23 | Q1, Q2, Q3 |
| 1 | Mains sense | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | 5V in | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | USB-C | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | Thermocouple K | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | Pressure 0-1.6MPa | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | Group NTC (opt) | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6 |
| 1 | Spare analog | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J7 |
| 1 | Heater SSR | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J8 |
| 1 | Pump SSR | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J9 |
| 1 | Valve SSR | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J10 |
| 1 | Switches | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J11 |
| 1 | Heater CT (opt) | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J12 |
| 1 | UART debug | PinHeader_1x04_P2.54mm_Vertical | J13 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100mA slow | Fuse_1206_3216Metric | F1 |
| 1 | RESET | SW_SPST_TL3342 | SW1 |
| 1 | BOOT | SW_SPST_TL3342 | SW2 |
| 2 | SS14 | D_SMA | D1, D2 |
| 3 | PESD5V0S1BA | D_SOD-323 | D3, D7, D8 |
| 1 | heater green | LED_0603_1608Metric | D4 |
| 1 | pump green | LED_0603_1608Metric | D5 |
| 1 | valve green | LED_0603_1608Metric | D6 |
| 1 | status blue | LED_0603_1608Metric | D9 |
| 1 | 100uF 16V | CP_Elec_6.3x7.7 | C1 |
| 1 | 10uF 10V | C_1206_3216Metric | C2 |
| 3 | 10uF | C_1206_3216Metric | C3, C5, C18 |
| 1 | 22uF 6.3V | C_1206_3216Metric | C4 |
| 9 | 100nF | C_0603_1608Metric | C6, C9, C11, C12, C13, C14, C15, C16 +1 |
| 1 | 1uF | C_0603_1608Metric | C7 |
| 1 | 100pF | C_0603_1608Metric | C8 |
| 1 | 10nF | C_0603_1608Metric | C10 |
| 1 | 1nF | C_0603_1608Metric | C19 |
| 7 | 10k | R_0603_1608Metric | R1, R7, R10, R26, R27, R30, R31 |
| 2 | 5.1k | R_0603_1608Metric | R2, R3 |
| 2 | 22k 1W | R_2512_6332Metric | R4, R5 |
| 1 | 47k | R_0603_1608Metric | R6 |
| 2 | 4.7k | R_0603_1608Metric | R8, R9 |
| 3 | 10k 0.1% | R_0603_1608Metric | R11, R13, R15 |
| 2 | 20k 0.1% | R_0603_1608Metric | R12, R14 |
| 8 | 1k | R_0603_1608Metric | R16, R23, R24, R25, R28, R29, R32, R33 |
| 3 | 100 | R_0603_1608Metric | R17, R18, R19 |
| 3 | 100k | R_0603_1608Metric | R20, R21, R22 |
Coffee design files
The KiCad project lives in the brensch/coffee repository on GitHub; these links point at the commit this page was built from.
Coffee: common questions
What microcontroller does the Coffee use?
The Coffee is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.
How many components are on the Coffee?
86 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Coffee design files?
From the brensch/coffee repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.
Can I use the Coffee design in my own project?
The repository has no license, so all rights stay with brensch. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Coffee without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k