Zoxnoxiouscard
About the Zoxnoxiouscard PCB
Zoxnoxiouscard is an open source PCB design by brer-rabbit, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 80 × 80 mm, with 16 components from 15 distinct parts.
Other key parts include the 74LVC245, NE5532, AD5328 and M24C02-WMN. By type, the board carries 5 capacitors, 4 ICs, 3 connectors, 3 resistors and 1 diode.
It belongs with the audio designs in this gallery.
From the project
Analog synth / software interface
The directories below contain KiCad files for the Zoxnoxious synthesizer. This includes files for both schematics, PCB layout, and assembly. Some boards also have a datasheet.
Z2203: Yamaha FM-based voice card with YM2203 chip Pole Dancer: pole mixing filter utilizing an SSI2140 and SSI2190 Z3340: Oscillator based around an AS3340 with four sync modes that can be combined Z3372: Lowpass filter with AS3372 filter chip. Stereo panning, filter and resonance modulation. * Z5524: dual VCO voice card. SSI2130 oscillator for TZFM, AS3394 for second VCO and filter. Powerful.
Main components on the Zoxnoxiouscard
Zoxnoxiouscard bill of materials (BOM)
16 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LVC245 PCA9555D | TSSOP-24_4.4x7.8mm_P0.65mm | U7 |
| 1 | NE5532 LM4040AIM3-2.5 | SOT-23 | U13 |
| 1 | AD5328 | TSSOP-16_4.4x5mm_P0.65mm | U14 |
| 1 | M24C02-WMN | SOIC-8_3.9x4.9mm_P1.27mm | U15 |
| 1 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Horizontal | J3 |
| 1 | LED | LED_0603_1608Metric | D4 |
| 1 | 0.1U 0.1u | C_0603_1608Metric | C13 |
| 1 | 100P 4.7u | C_0805_2012Metric | C24 |
| 1 | 100P 0.1u | C_0603_1608Metric | C25 |
| 2 | 0.1u | C_0603_1608Metric | C37, C39 |
| 1 | 5k1 | R_0603_1608Metric | R20 |
| 1 | 4k7 | R_1206_3216Metric | R47 |
| 1 | 2k | R_0603_1608Metric | R56 |
Zoxnoxiouscard design files
The KiCad project lives in the brer-rabbit/zoxnoxious repository on GitHub; these links point at the commit this page was built from.
Zoxnoxiouscard: common questions
How big is the Zoxnoxiouscard PCB?
The Zoxnoxiouscard measures 80 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Zoxnoxiouscard?
16 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Zoxnoxiouscard design files?
From the brer-rabbit/zoxnoxious repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Zoxnoxiouscard design in my own project?
Yes, under the terms of its GPL-3.0 license, which brer-rabbit chose for the repository.
More boards in zoxnoxious
Zoxnoxious Z5524 (SSI2130/AS3394)
80 × 80 mm222 parts4LGPL-3.068
Zoxnoxious Pole Dancer Mixing Filter
80 × 80 mm150 parts4LGPL-3.068
Z3340 VCO
80 × 80 mm139 parts4LGPL-3.068
Z3372 Filter
80 × 80 mm120 parts4LGPL-3.068
Raspberry PiZoxnoxious Backplane and VCA
133.8 × 102.9 mm86 parts4LGPL-3.068
Zoxnoxious 2203 FM Operator Type-N (OPN)
80 × 80 mm34 parts4LGPL-3.068
Similar boards
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT665
OtterCastAmp
96 × 100 mm250 parts4LMIT341
FunBox
GuitarML
59.7 × 67.5 mm63 parts2LMIT278
Eurorack pmod
apfaudio
35 × 110 mm116 parts4LCERN-OHL-S-2.0239
XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229