PA-Sequencer-Hardware
brokebit·PA-Sequencer-Hardware
About the PA-Sequencer-Hardware PCB
PA-Sequencer-Hardware is an open source ESP32 PCB design by brokebit, published on GitHub. It is a 6-layer board measuring 152.4 × 94 mm, with 115 components from 29 distinct parts.
Its main chip is the ESP32-S3-DEVKITC, from the ESP32 family. Other key parts include the C5605, ADS1115IDGS, TPS5430DDAR and AMS1117-3.3_C347222. By type, the board carries 47 resistors, 25 connectors, 16 capacitors, 8 diodes, 6 ICs and 6 transistors.
It belongs with the audio designs in this gallery.
From the project
Sequencer for a Power Amplifier
Main components on the PA-Sequencer-Hardware
PA-Sequencer-Hardware bill of materials (BOM)
115 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC ESP32-S3-DevKitC | ESP32-S3-DevKitC | U1 |
| 1 | C5605 74HC14D,653 | SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | U2 |
| 2 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U3, U4 |
| 1 | TPS5430DDAR | ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP | U5 |
| 1 | AMS1117-3.3_C347222 | SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR | U6 |
| 6 | MMBT2222A | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 3 | TBP02R1-381-04OR | CUI_TBP02R1-381-04OR | CN-ADC1, CN-I2C1, CN-LCD1 |
| 16 | TBP02R1-381-02OR | CUI_TBP02R1-381-02OR | CN-BTN1, CN-BTN2, CN-BTN3, CN-BTN4, CN-BTN5, CN-BTN6, CN-GPIO1, CN-PTT1 +8 |
| 1 | LCD_PWR_SELECT | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 3 | TBP02R1-381-02OR | CUI_TBP02R1-381-02OR | J2, J5, J6 |
| 2 | CONN_01X22_SOCKET Conn_01x22_Socket | PinSocket_1x22_P2.54mm_Vertical | J3, J4 |
| 6 | G6K-2F-Y-TR DC5 | G6K-2F-Y DC3 | RLA1, RLA2, RLA3, RLA4, RLA5, RLA6 |
| 1 | B340A | SMA_L4.3-W2.6-LS5.1-RD | D1 |
| 7 | LED | LED_0805_2012Metric | D2, D3, D4, D5, D6, D7, D8 |
| 1 | 15UH 15uH | IND-SMD_L12.5-W12.5_RLF12545T | L1 |
| 7 | .1uf | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7 |
| 2 | 100NF 100nf | C_0805_2012Metric | C8, C9 |
| 5 | 10UF 10uf | C_0603_1608Metric | C13, C14, C15, C19, C20 |
| 1 | 330UF 330uF | CAP-SMD_L7.3-W4.3-R-RD | C16 |
| 1 | 10NF 10nf | C_0603_1608Metric | C17 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 23 | 10K 10k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +15 |
| 6 | 4.7K 4.7k | R_1206_3216Metric | R13, R16, R23, R25, R27, R29 |
| 6 | 36 | R_0805_2012Metric | R14, R15, R22, R24, R26, R28 |
| 1 | 10K 10k | R_0603_1608Metric | R19 |
| 1 | 3.24K 3.24k | R_0603_1608Metric | R20 |
| 1 | 40 | R_0805_2012Metric | R21 |
| 1 | 18K 18k | R_0805_2012Metric | R30 |
| 6 | 15K 15k | R_0805_2012Metric | R34, R36, R37, R39, R45, R47 |
| 2 | 100K 100k | R_0805_2012Metric | R40, R50 |
PA-Sequencer-Hardware design files
The KiCad project lives in the brokebit/PA-Sequencer-Hardware repository on GitHub; these links point at the commit this page was built from.
PA-Sequencer-Hardware: common questions
What microcontroller does the PA-Sequencer-Hardware use?
The PA-Sequencer-Hardware is built around the ESP32-S3-DEVKITC, from the ESP32 family.
How big is the PA-Sequencer-Hardware PCB?
The PA-Sequencer-Hardware measures 152.4 × 94 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the PA-Sequencer-Hardware?
115 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PA-Sequencer-Hardware design files?
From the brokebit/PA-Sequencer-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PA-Sequencer-Hardware design in my own project?
The repository has no license, so all rights stay with brokebit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PA-Sequencer-Hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k