8 open source boards using the AMS1117-3.3_C347222
Real designs built with the AMS1117-3.3_C347222, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MSX Goauld Rev4
jabadiagm
33.3 × 54.6 mm17 parts4LGPL-3.098- schematic only · 47 partsESP32
MY-COOL-ESP32
bhardwajpragya1111-lgtm
47 partsNo license1 STM32
Precharge controller board
wangyanyu1817
100 × 100 mm212 parts2LNo license0ESP32
PA-Sequencer-Hardware
brokebit
152.4 × 94 mm115 parts6LNo license0ESP32
Rotator-ESP32-S3-Board
brokebit
110.9 × 93 mm79 parts6LNo license0RP2040/RP2350
Mazzy mini
jaspermayone
52 × 57.5 mm71 parts2LNo license0ESP32
SolarDataLogger
brokebit
90 × 90 mm64 parts6LCC0-1.00ESP32
AVA-GEM
alrazzi1
68.6 × 23.3 mm32 parts2LNo license0
How designs wire the AMS1117-3.3_C347222
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AMS1117-3.3_C347222 connects to, and the resistors, capacitors and other passives placed on it.
- The TAB pin is tied to 3.3V on 5 of 6 designs.
- The VIN pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 22 µF).
- The VOUT(TAB) pin has a decoupling capacitor on 3 of 7 designs, most often 10 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ADJ(GND)pin 1 | Connected to: GND 100% | — |
| VOUT(TAB)pin 2 | Connected to: 3.3V 100% |
|
| VINpin 3 | Connected to: 5V 100% |
|
| TABpin 4 | Connected to: 3.3V 83% · not connected 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MSX Goauld Rev4 by jabadiagm, AVA-GEM by alrazzi1, PA-Sequencer-Hardware by brokebit and Rotator-ESP32-S3-Board by brokebit.
The AMS1117-3.3_C347222 in open source designs
The gallery holds 8 open source boards using the AMS1117-3.3_C347222 from 8 GitHub repositories; a typical one measures about 90 × 90 mm and carries around 68 components.
57% use four copper layers or more, and 25% carry an open source license.
The most starred is MSX Goauld Rev4 by jabadiagm.
Parts used alongside the AMS1117-3.3_C347222
Microcontrollers on boards using the AMS1117-3.3_C347222
What boards using the AMS1117-3.3_C347222 are built for
AMS1117-3.3_C347222: common questions
Where can I find a AMS1117-3.3_C347222 reference design?
Each of the 8 boards on this page is a real design using the AMS1117-3.3_C347222. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AMS1117-3.3_C347222 TAB pin connected?
The TAB pin is tied to 3.3V on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the AMS1117-3.3_C347222.
What decoupling capacitors do designs use on the AMS1117-3.3_C347222 VIN pin?
The VIN pin has a decoupling capacitor on 4 of 7 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the AMS1117-3.3_C347222.
What decoupling capacitors do designs use on the AMS1117-3.3_C347222 VOUT(TAB) pin?
The VOUT(TAB) pin has a decoupling capacitor on 3 of 7 designs, most often 10 µF. Counted from the KiCad layouts of 7 open source designs using the AMS1117-3.3_C347222.
What parts are used alongside the AMS1117-3.3_C347222?
The TPS5430DDAR, C5605 and ESP32-S3-DevKitC appear in the most repositories here.
Which microcontrollers do boards using the AMS1117-3.3_C347222 use?
Most are built on ESP32 (5), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the AMS1117-3.3_C347222?
The median is 90 × 90 mm, and 43% are two-layer designs.
What is the most popular open source board using the AMS1117-3.3_C347222?
By GitHub stars, MSX Goauld Rev4 by jabadiagm, with 98 stars.
Can I simulate one of these boards using the AMS1117-3.3_C347222 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.