Rotator-ESP32-S3-Board

brokebit·Rotator-ESP32-S3-Board

Rotator-ESP32-S3-Board layout, top view — open source ESP32 board by brokebit

About the Rotator-ESP32-S3-Board

Rotator-ESP32-S3-Board is an open source ESP32 PCB design by brokebit, published on GitHub. It is a 6-layer board measuring 110.9 × 93 mm, with 79 components from 26 distinct parts.

Its main chip is the ESP32-S3-DEVKITC, from the ESP32 family. Other key parts include the C5605, TPS5430DDAR and AMS1117-3.3_C347222. By type, the board carries 27 resistors, 21 connectors, 17 capacitors, 6 transistors, 5 ICs and 2 diodes.

It belongs with the robotics & motion and displays & leds designs in this gallery.

From the project

Rotator Controller based on an ESP32-S3 micro and Clearpath Servos

Rotator-ESP32-S3-Board, from the project README
From the project README

Main components on the Rotator-ESP32-S3-Board

Rotator-ESP32-S3-Board bill of materials (BOM)

79 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DEVKITC
ESP32-S3-DevKitC
U1
2
C5605
74HC14D,653
U2, U3
1
TPS5430DDAR
U5
1
AMS1117-3.3_C347222
U6
6
MMBT3904
Q9, Q10, Q11, Q12, Q13, Q14
1
WJ15EDGVC-3.81-5P
CN1-IO1
3
WJ15EDGVC-3.81-4P
CN3-I2C1, CN4-LCD1, CN5-GPS1
1
KF2EDGV-3.81-2P
CN5
8
KF2EDGV-3.81-2P
CN6-CW1, CN7-CCW1, CN8-UP1, CN9-DOWN1, CN10-HOME1, CN11-MOON1, CN12-RST1, CN13-PWR2
2
RH-5019
CN8-SCL1, CN9-SDA1
1
LCD_PWR_SELECT
J1
1
GPS_PWR_SELECT
J2
2
CONN_01X22_SOCKET
Conn_01x22_Socket
J3, J4
2
WJ15EDGVC-6P
P1, P2
1
B340A
D1
1
LED
D2
1
15UH
15uH
L1
10
.1uf
C1, C2, C3, C4, C5, C6, C7, C8 +2
5
10UF
10uf
C13, C14, C15, C19, C20
1
330UF
330uF
C16
Show 6 more
QtyPartRefs
1
10NF
10nf
C17
18
10K
10k
R1, R2, R3, R4, R5, R6, R7, R8 +10
1
10K
10k
R19
1
3.24K
3.24k
R20
1
40
R21
6
4.7K
4.7k
R38, R39, R40, R41, R42, R43

Rotator-ESP32-S3-Board design files

The KiCad project lives in the brokebit/Rotator-ESP32-S3-Board repository on GitHub; these links point at the commit this page was built from.

Rotator-ESP32-S3-Board: common questions

What microcontroller does the Rotator-ESP32-S3-Board use?

The Rotator-ESP32-S3-Board is built around the ESP32-S3-DEVKITC, from the ESP32 family.

How big is the Rotator-ESP32-S3-Board?

The Rotator-ESP32-S3-Board measures 110.9 × 93 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Rotator-ESP32-S3-Board?

79 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rotator-ESP32-S3-Board design files?

From the brokebit/Rotator-ESP32-S3-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rotator-ESP32-S3-Board design in my own project?

The repository has no license, so all rights stay with brokebit. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rotator-ESP32-S3-Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards