SolarDataLogger

brokebit·SolarDataLogger·hardware/SolarDataLogger/SolarDataLogger.kicad_pcb

SolarDataLogger PCB layout, top view — open source ESP32 board by brokebit

About the SolarDataLogger PCB

SolarDataLogger is an open source ESP32 PCB design by brokebit, published on GitHub under the CC0-1.0 license. It is a 6-layer board measuring 90 × 90 mm, with 64 components from 32 distinct parts.

Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the AMS1117-3.3_C347222, RH-5000, TPS5430DDAR, AHT20_C2757850 and HY2541WV-N-2X3P. By type, the board carries 17 resistors, 13 ICs, 13 capacitors, 12 diodes, 2 connectors and 2 switches.

It belongs with the power & battery, iot & wireless and sensors designs in this gallery.

From the project

Firmware for custom data logger for Victron MPPT charge controllers via the Ve.Direct port/protocol.

Firmware for custom data logger for Victron MPPT charge controllers via the Ve.Direct port/protocol.

Supports both the smaller MPPT controllers that have load output and control:

- MPPT 75/10 - MPPT 75/15 - MPPT 100/10 - MPPT 100/20

Also support larger MPPT controllers without load output via a INA226 Current sensor on an add-on board:

- MPPT 100/30 - MPPT 100/50 - MPPT 150/35 - MPPT 150/45 - MPPT 150/60 - MPPT 250/70

SolarDataLogger, from the project README
From the project README

Main components on the SolarDataLogger

SolarDataLogger bill of materials (BOM)

64 components, 32 distinct parts.

QtyPartRefs
1
AMS1117-3.3_C347222
U1
7
RH-5000
U2, U4, U5, U9, U10, U11, U12
1
TPS5430DDAR
U3
1
AHT20_C2757850
U6
1
HY2541WV-N-2X3P
U7
1
ESP32-C6-WROOM-1-N8
U8
1
CP2102N-A02-GQFN24R
U13
1
LBC847BDW1T1G
Q1
1
2305908-2
J1
1
2213932-3
J2
2
TS-1088-AR02016
SW1, SW2
2
TYPE-C 16PIN 2MD(073)
USB1, USB2
1
XL-5050RGBC-WS2812B
LED1
1
B340A
D1
1
1N4148WS_C917117
D2
2
1N5819HW-7-F
D3, D7
6
LESD5D5.0CT1G
D4, D5, D6, D8, D9, D10
1
RXD
D11
1
TXD
D12
1
FNR5040S220MT
L1
Show 12 more
QtyPartRefs
5
10nf
C1, C2, C3, C8, C9
5
10uf
C4, C6, C7, C10, C11
1
220uf
C5
1
4.7uf
C12
1
100nf
C13
1
3.24k
R1
5
10k
R2, R3, R4, R12, R13
1
4.7k
R5
2
100k
R6, R7
4
5.1k
R8, R9, R10, R11
3
20k
R14, R15, R16
1
1k
R17

SolarDataLogger design files

The KiCad project lives in the brokebit/SolarDataLogger repository on GitHub; these links point at the commit this page was built from.

SolarDataLogger: common questions

What microcontroller does the SolarDataLogger use?

The SolarDataLogger is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.

How big is the SolarDataLogger PCB?

The SolarDataLogger measures 90 × 90 mm, has 6 copper layers and is 1.649 mm thick.

How many components are on the SolarDataLogger?

64 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the SolarDataLogger design files?

From the brokebit/SolarDataLogger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SolarDataLogger design in my own project?

Yes, under the terms of its CC0-1.0 license, which brokebit chose for the repository.

Can I test firmware for the SolarDataLogger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards